Any Experience with
Thread Starter
|
Cruiser
Joined: Feb 2005
Posts: 199
Likes: 0
From:
Any Experience with
Does anyone have any experience with a KERKER 2 into 1?
I am having some trouble having the mount fit without pulling the pipes kinda hard.
Also, any ideas how this will preform?
W
I am having some trouble having the mount fit without pulling the pipes kinda hard.
Also, any ideas how this will preform?
W
Advanced
Joined: Jan 2005
Posts: 58
Likes: 0
RE: Any Experience with
I have a Vance+Hines Pro pipe, it is somewhat like yours. The mount on the muffler is adjustable, if yours is not, then an old saying in the body shop is, when in doubt ream it out applys. This would be at the frame mounting point. Good Luck Dave
Road Master
Joined: Jan 2005
Posts: 1,238
Likes: 0
From:
RE: Any Experience with
Be very careful with the tightening directions they give you...Close fit pipes have different installation instructions. Tightem at the heads, and mounting points when and how they tell you!
BRUCE
BRUCE
Thread
Thread Starter
Forum
Replies
Last Post
