Headlight Trim Ring
Thread Starter
|
Elite HDF Member
Joined: Nov 2006
Posts: 3,514
Likes: 0
From: Hollyweird,FL
Headlight Trim Ring
I installed a headlight trim ring on my FXDL today and try as I might I can't get it to completely close up on the bottom...upon looking at pics in the parts dream book, it seems like a lot of headlight trim rings don't close completely, anybody got any input on this? I really don't like that gap...grrrrr
[IMG]local://upfiles/21453/DA89FA560F9C4FF1807010EBE4CDDC6D.jpg[/IMG]
[IMG]local://upfiles/21453/E039DEC45BAC4FD481170A89A979F72D.jpg[/IMG]
[IMG]local://upfiles/21453/DA89FA560F9C4FF1807010EBE4CDDC6D.jpg[/IMG]
[IMG]local://upfiles/21453/E039DEC45BAC4FD481170A89A979F72D.jpg[/IMG]
Elite HDF Member
Joined: Sep 2006
Posts: 3,718
Likes: 11
From: Punta Gorda,FL
RE: Headlight Trim Ring
I went out and looked at my setup to see if I could help. I have the optional 7" Chrome headlight bezel on my 2005 Fat Boy SE. It is HD # 69626-99. It is approx. 2 1/4" wide.It is one piece and attaches at the bottom with a screw.You can see it in my signature picture.There is no split in the ring.
What model is your bezel?
Tom
What model is your bezel?
Tom
Tourer
Joined: Dec 2006
Posts: 375
Likes: 0
From:
RE: Headlight Trim Ring
Something is keeping it from closing 100%. It should not have a space. It takes a little working, but go ahaed and take it off and if you have someone to help, see if they can hold it together while you install the screw and nut. They can be a pain, but you should be able to get it to fit right.
Thread Starter
|
Elite HDF Member
Joined: Nov 2006
Posts: 3,514
Likes: 0
From: Hollyweird,FL
RE: Headlight Trim Ring
thanks for the replies guys...Tom the Bezel part # is 69735-05...same deal..one piece...attachs on the bottom with a nut and screw that runs through the bottom of the bezel....I fought with it for 3 hrs last night , took it off and put it back on numerous times...same result each time...
Thread
Thread Starter
Forum
Replies
Last Post
