SE Ventilator
Thread Starter
|
Advanced
Joined: Jan 2014
Posts: 65
Likes: 3
From: Middle Georgia
SE Ventilator
Didn't see a good place for intake questions so I'll post it here. I'm kinda digging on the looks of the SE Ventilator air cleaner. I think the chrome version would look good on my bike. While running better is always a bonus, this is first and foremost for the looks factor. I'm aware I might have to have some ECM work done (already got high flow slip-ons) , so if it runs good on top of looking like I want it it's all good. Anybody have any experience with this AC? Does that rain sock really work? I don't make a practice of riding in the rain but like everybody I sometimes get caught. I'd hate to know it was a water sucker. Is it very noisy compared to the SE Heavy Breather?...that one is kind of loud to me. Just wonder what you good folks can tell me before I make the move. Thanks.
Cruiser
Joined: May 2011
Posts: 158
Likes: 0
From: Georgia
I put one on my '12 Limited, and it's worked fine. Rain sock works, but I've never really needed it in light showers. It sounded a bit louder than stock at first, but that wears off quick, and I've not given it another thought - all my noise comes from the V&H Propipe.
Supporter
Joined: Feb 2008
Posts: 4,133
Likes: 147
From: Grays Creek, NC
I changed out my heavy breather to a ventilator when I put the lower fairings on, the ventilator is quieter. I ride in the rain a lot and have never had a single issue with the rain sock, both with the stock dry filter and running the oiled K&N filter upgrade.
A good tuner is recommended when changing the air set up. Using a power commander V or power vision (or any good tuner) will really wake up the bike compared to the stock EPA tune Harley runs on the bike stock.
A good tuner is recommended when changing the air set up. Using a power commander V or power vision (or any good tuner) will really wake up the bike compared to the stock EPA tune Harley runs on the bike stock.
Thread
Thread Starter
Forum
Replies
Last Post
joe98
Engine Mechanical Topics
3
Aug 14, 2014 05:02 AM
Bagger Jim
Dyna Glide Models
20
Jan 31, 2012 03:49 PM
