Superchips Vigilante explained
Pat,
Yes, I'm running the V&H 2-2 Big Radius and the heavy breather map. No decal pops at all and runs very well. Feels almost that in second I might be able to get the front off the ground but not. Really a good change for sure. I would like to adjust my idle down to say 950 or so when warm. That would be a nice feature to add possibly. Anyway I'm guessing the Super Radius is close tot he Big radius enough the map works for both. Very pleased customer here!!!
Gary
Yes, I'm running the V&H 2-2 Big Radius and the heavy breather map. No decal pops at all and runs very well. Feels almost that in second I might be able to get the front off the ground but not. Really a good change for sure. I would like to adjust my idle down to say 950 or so when warm. That would be a nice feature to add possibly. Anyway I'm guessing the Super Radius is close tot he Big radius enough the map works for both. Very pleased customer here!!!
Gary
Great to hear, glad you're enjoying the bike Gary! Thank you for the feedback, I do appreciate it.
I'll keep an eye out for that generation bike and see what I can do to get that exhaust added for you. That dual file in there should work well though.
Thanks, Pat.
Tourer
Joined: Jul 2011
Posts: 275
Likes: 2
From: La Quinta CA
I installed mine in my 2013 Ultra Limited it gave me a choice of 3 Different maps I installed the last of the 3 And to it on a 1800 Mile trip bike runs great got ready of the trolled delay and over all very satisfied
Intermediate
Joined: Jan 2015
Posts: 28
Likes: 3
From: Wisconsin
Communication problem with h-d help desk at SuperChips
Hi Pat , good info ! Have a 13 FLHTK Touring that I am doing some basic exhaust / breather mods this winter , got the idea for the Vigilante EZ from the American Iron Motorcycle Bagger Jan/15 issue . They used it for a basic exhaust/intake mod with decent results on a 13 FLH . I went with K&N Rk air box , Rush eco 2-1-2 exhaust header (cat less ) with a pair of Supertrapp fatshot mufflers . At first update of the tuner with spark there were issues , talked to Sam last week and he got me thru . Absolutely no parts that I have mentioned are stored in the data base of the Vigilante EZ , surprised me cause these are popular brand parts. I got 7 different SCO Tune codes when I plugged into the bike . Question is which code to use until I am able to ride n test the bike in the spring . Right now I would like to get a leak check on the parts installed and have a decent baseline tune to start with . I have called and spoke to Ron , he said he would get back to me in a day or two ..that was a week ago . I also sent a couple emails but have not gotten a response back . Maybe you can help me out . Jeff
Thread
Thread Starter
Forum
Replies
Last Post
BlackBastard
Ignition/Tuner/ECM/Fuel Injection
7
Apr 13, 2016 06:44 PM
