Coil OHM's Test??
Thread Starter
|
Stellar HDF Member
Joined: Mar 2009
Posts: 2,454
Likes: 58
From: Graysville, AL
Coil OHM's Test??
Hello, can anyone tell me the procedure to check for a good/bad coil? The coil I have is the plug/connector style off a 07 Street Glide. It has 4 male end posts. I just need to know what posts I check with the OHM meter and what the resistance should be. Thanks for the help. I googled but only saw the older style coils that do not have the plug style connector.
Seasoned HDF Member
Joined: Apr 2013
Posts: 32,851
Likes: 17,888
From: Newcastle, OK
Hello, can anyone tell me the procedure to check for a good/bad coil? The coil I have is the plug/connector style off a 07 Street Glide. It has 4 male end posts. I just need to know what posts I check with the OHM meter and what the resistance should be. Thanks for the help. I googled but only saw the older style coils that do not have the plug style connector.
Thread Starter
|
Stellar HDF Member
Joined: Mar 2009
Posts: 2,454
Likes: 58
From: Graysville, AL
I found some info online about testing a similar plugged coil off s Subaru Forester. It had the 4 metal male end prongs are labeled A B C D. It said to put your multi meter leads on A B test the resistance and then on C D and test. I tried it this way and my meter reads OL on both tests.
This might be the completely wrong way to test it but it was the closet info I could find with that style plug.
This might be the completely wrong way to test it but it was the closet info I could find with that style plug.
Thread
Thread Starter
Forum
Replies
Last Post
