Ignition/Tuner/ECM/Fuel Injection Need advice on ignition issues? Questions about a tuner? Have questions about a EFI calibration or Fuel Injection? Tips on Engine Diagnostics, how to get codes, and what they mean. Find your answers here.

Need a code explained

Thread Tools
 
Search this Thread
 
Old Jun 1, 2008 | 08:14 PM
  #1  
elpoman's Avatar
elpoman
Thread Starter
|
Advanced
Joined: Jan 2008
Posts: 99
Likes: 0
From: Brookville, Ohio
Default Need a code explained

I have an O8 ultra, and just checked my diagnostic trouble codes, and I get a code that is not on any list that I have seen. I get a C 1095 on the laster letter on the dash witch is a small letter b witch is also not shown on any list. I have PSSPTb. Help.No check engine light.
 
Reply
Old Jun 1, 2008 | 08:55 PM
  #2  
waterboyjack's Avatar
waterboyjack
Intermediate
Joined: May 2008
Posts: 39
Likes: 0
From: Shemya and Anchorage, AK
Default RE: Need a code explained

DTC 1095= Front brake switch open. check little black switch behind brake lever.
 
Reply
Old Jun 1, 2008 | 09:08 PM
  #3  
elpoman's Avatar
elpoman
Thread Starter
|
Advanced
Joined: Jan 2008
Posts: 99
Likes: 0
From: Brookville, Ohio
Default RE: Need a code explained

ORIGINAL: waterboyjack

DTC 1095= Front brake switch open. check little black switch behind brake lever.
I'm new to Harleys, and what little black switch, and where behind the brake lever.
 
Reply
Old Jun 1, 2008 | 09:10 PM
  #4  
gs34doc's Avatar
gs34doc
Big Kahuna HDF Member
Veteran: Army
Joined: Apr 2008
Posts: 38,428
Likes: 896
Default RE: Need a code explained

I was searching my manual...Where did you find that code Jack??
 
Reply
Old Jun 1, 2008 | 09:14 PM
  #5  
elpoman's Avatar
elpoman
Thread Starter
|
Advanced
Joined: Jan 2008
Posts: 99
Likes: 0
From: Brookville, Ohio
Default RE: Need a code explained

It came up on the b letter of the PSSpTb. the b is not listed on any code list that I can find so far. it was a C 1095 code.
 
Reply
Old Jun 1, 2008 | 09:16 PM
  #6  
elpoman's Avatar
elpoman
Thread Starter
|
Advanced
Joined: Jan 2008
Posts: 99
Likes: 0
From: Brookville, Ohio
Default RE: Need a code explained

All the code lists that I have seen have codes for the PSSPT but not the b. I'm tring to find out if it is something to take it back to the dealer about, or just clear and see.No chech enging light.
 
Reply
Old Jun 1, 2008 | 10:17 PM
  #7  
waterboyjack's Avatar
waterboyjack
Intermediate
Joined: May 2008
Posts: 39
Likes: 0
From: Shemya and Anchorage, AK
Default RE: Need a code explained

it is in the electrical diagnostic manual. switch is located near pivot point of lever "inside" right hand control housing.
 
Reply
Old Jun 1, 2008 | 10:34 PM
  #8  
waterboyjack's Avatar
waterboyjack
Intermediate
Joined: May 2008
Posts: 39
Likes: 0
From: Shemya and Anchorage, AK
Default RE: Need a code explained

this dtc is for ABS. according to manual ABS will still function fine however you may not have brake lights when applying front brake and YES , I would take it back to dealer if it did not clear after checking switch in hand control/front brake lever. Manual says can be caused by open circuit or short to ground. Have you had the switch box off lately??? pinched a wire maybe when reinstalling??? Sorry it took so long to respond, hope this helps.
 
Reply
Old Jun 1, 2008 | 10:42 PM
  #9  
gs34doc's Avatar
gs34doc
Big Kahuna HDF Member
Veteran: Army
Joined: Apr 2008
Posts: 38,428
Likes: 896
Default RE: Need a code explained

Thanks Jack. That explains why I couldn't find it. I was looking in my 07 manual.
 
Reply
Old Jun 1, 2008 | 10:47 PM
  #10  
waterboyjack's Avatar
waterboyjack
Intermediate
Joined: May 2008
Posts: 39
Likes: 0
From: Shemya and Anchorage, AK
Default RE: Need a code explained

ORIGINAL: gs34doc

Thanks Jack. That explains why I couldn't find it. I was looking in my 07 manual.

Service manuals are OK..... But Much better if U have Parts book and Electrical diagnostic manual. My 2 pennies.
 
Reply



All times are GMT -5. The time now is 01:50 AM.