coil specs for points ign.
#1
coil specs for points ign.
Hello...I run a kick-only chopper (home built) points ign, 80" Evo motor. I've had a real hard time starting it lately. Been riding this bike for 6 years this way. I have many coils laying around and every one has different resistance readings, as follows
#1= P=4.5ohms S=18,910 ohms
#2= P=3.8 " S=17,700 "
#3= P=5.0 " S=11,550 "
#4= P=4.5 " S=24,060 "
I now have a coil in there that is factory spec perfect and it runs fine and starts good.
P=5.0 S= 18,000 ohms
My question is : Do these other readings mean that these coils are no good? I think one or two were supposed to be 40,000 volts plus to the plugs. None of them are for electronic ign.,so what gives? Thanks in advance
onewayphil
#1= P=4.5ohms S=18,910 ohms
#2= P=3.8 " S=17,700 "
#3= P=5.0 " S=11,550 "
#4= P=4.5 " S=24,060 "
I now have a coil in there that is factory spec perfect and it runs fine and starts good.
P=5.0 S= 18,000 ohms
My question is : Do these other readings mean that these coils are no good? I think one or two were supposed to be 40,000 volts plus to the plugs. None of them are for electronic ign.,so what gives? Thanks in advance
onewayphil
Thread
Thread Starter
Forum
Replies
Last Post
Blown 331
Ignition/Tuner/ECM/Fuel Injection
1
04-11-2006 03:22 PM