RF wave???
Thread Starter
|
Tourer
Joined: Aug 2008
Posts: 355
Likes: 0
From: North of the Laurention Divide, MN
RF wave???
i gots a 2009 road king. 25000mi. it had PC V with a ness BS and rivco slip ons. i changed to wildthing cam, kuryakyn tru duals with tts mastertune. the kuryakyn fella doing the dynotune called 2 day and said my bike is throwing off a RF wave?? that is interfering with his dyno. possible??? short? bike does not give a error code. appears intermittent thing. he said he heard sumthing about the stock ECU plug having a issue of cycle memory. i had noted a few incidents this late summer and into the fall of a hiccup of sorts occuring once in a while, and mabe with some slight increasing frequency??? he also figures that if it was from a short, it would throw a error code.
thanks ......TJ
thanks ......TJ
Road Captain
Joined: Mar 2006
Posts: 741
Likes: 11
From: West Central WI
I have an 09 on my dyno now with a PCV and was having a problem with the rpm leads, the dyno tach would jump all over during a run, thought I was going to pull my hair out, turned out that the bike had NGK plugs in it and the top caps were loose. Tightened up and no more RF problems.
i gots a 2009 road king. 25000mi. it had PC V with a ness BS and rivco slip ons. i changed to wildthing cam, kuryakyn tru duals with tts mastertune. the kuryakyn fella doing the dynotune called 2 day and said my bike is throwing off a RF wave?? that is interfering with his dyno. possible??? short? bike does not give a error code. appears intermittent thing. he said he heard sumthing about the stock ECU plug having a issue of cycle memory. i had noted a few incidents this late summer and into the fall of a hiccup of sorts occuring once in a while, and mabe with some slight increasing frequency??? he also figures that if it was from a short, it would throw a error code.
thanks ......TJ
thanks ......TJ
Road Master
Joined: Dec 2006
Posts: 1,058
Likes: 6
From: Omaha Nebraska
Plug wires often cause an RF problem, a defective stock wire or using aftermarket non or low resistance wires will increase RF activity. I've had some of my dyno test equipment damaged a few times by customer's engines who were using non resistance plug wires until I started to check for that before testing.
Thread
Thread Starter
Forum
Replies
Last Post
