92059-07 troubleshooting
Thread Starter
|
6th Gear
Joined: Jul 2009
Posts: 13
Likes: 0
From: Edmonton, Alberta
92059-07 troubleshooting
I have these mirrors on my 09 FXSTC.
I was bleeding the front brake and when tightening the right one back up (from under the m. cylinder cover) I accidentally pinched the wires off - DOH!!!
I soldered and sealed them back together, but now the lights don't work at all - running or directional. The connections are good, but no dice.
I have a secondary light bar under my tree, and it still works fine, but not the mirror light.
Any thoughts on this?
Thanks
I was bleeding the front brake and when tightening the right one back up (from under the m. cylinder cover) I accidentally pinched the wires off - DOH!!!
I soldered and sealed them back together, but now the lights don't work at all - running or directional. The connections are good, but no dice.
I have a secondary light bar under my tree, and it still works fine, but not the mirror light.
Any thoughts on this?
Thanks
Seasoned HDF Member
Joined: Jun 2006
Posts: 28,559
Likes: 3,955
From: Vermont
Thread Starter
|
6th Gear
Joined: Jul 2009
Posts: 13
Likes: 0
From: Edmonton, Alberta
Hey Dawg.
This wasn't on an install..they have been on a year and a half.
I checked that sheet first to see if there was a "troubleshooting" part to it.
I can't see any reason with the right mirror doesn't light anymore.
Connections are sound but it doesn't work now.
This wasn't on an install..they have been on a year and a half.
I checked that sheet first to see if there was a "troubleshooting" part to it.
I can't see any reason with the right mirror doesn't light anymore.
Connections are sound but it doesn't work now.
Thread
Thread Starter
Forum
Replies
Last Post
wotanson
Electrical/Lighting/Alarm
3
May 29, 2019 07:40 PM
