Programing Question
Thread Starter
|
Intermediate
Joined: Dec 2012
Posts: 40
Likes: 0
From: Newark DE
Programing Question
OK so In my line of work i deal with a lot of computer programing (on drill rigs). However I have the tools to be able to read and program can open, J1939, networks. I know i can tie into the programing port on my bike with my laptop and i am pretty sure that the Harley ECM is Can Open. I want to play around and see if i can change or download new fuel maps etc... Has anyone ever messed with anything like this or have some input from experience with it.
Thanks
Thanks
Outstanding HDF Member
Joined: May 2008
Posts: 2,543
Likes: 19
From: Ashland Ohio
good luck
there is no such thing as a 'fuel map' per se in the ECM, etc. THAT is why we use tuning products that give us a decent GUI on the HMI. There are actually 100s of tables etc in an ECM.
there is no such thing as a 'fuel map' per se in the ECM, etc. THAT is why we use tuning products that give us a decent GUI on the HMI. There are actually 100s of tables etc in an ECM.
Thread
Thread Starter
Forum
Replies
Last Post
bcane98
Ignition/Tuner/ECM/Fuel Injection
2
Dec 29, 2009 02:47 PM
