Starting issues Road King
Thread Starter
|
1st Gear
Joined: Oct 2009
Posts: 5
Likes: 0
Starting issues Road King
Here goes; I had to replace the shifter arm on my 2002 Road King CVO, this required me to take the complete primary case off and some of the starter guts. I put everything back together and hit the start button and heard the dreaded click and no spin from the starter. The battery is fully charged and all sources I have read are pointing to starter solenoid is this it or does someone have another idea? Appreciate all the help I can get.
Road Master
Joined: Jul 2007
Posts: 1,009
Likes: 4
Here goes; I had to replace the shifter arm on my 2002 Road King CVO, this required me to take the complete primary case off and some of the starter guts. I put everything back together and hit the start button and heard the dreaded click and no spin from the starter. The battery is fully charged and all sources I have read are pointing to starter solenoid is this it or does someone have another idea? Appreciate all the help I can get.
Cruiser
Joined: Jan 2014
Posts: 102
Likes: 0
From: lincoln ne
As mentioned; Jackshaft coupling in backwards...or jackshaft bolt torqued to tight, use red locktite and torque to only 5 ft lbs. Is there a ground wire running to your starter mounting bolt on the primary? If so did you remember to tighten it?
Oh yeah one more idea, are you sure that the battery is good?
Oh yeah one more idea, are you sure that the battery is good?
Thread
Thread Starter
Forum
Replies
Last Post
BK Meyers
Ignition/Tuner/ECM/Fuel Injection
4
Jul 21, 2007 01:34 PM
