I live in Nor-Cal and been having hickups starting in the mornings. Sounds like one cylinders barely starts, almost dies and other then starts, really weird. Code is P214900P & U228700P. Starts fine in the afternoon after work. Anyone else having similar issues or had a fix?

 

If the bike has issues starting when its cold (as in outside temperature) there is a recall (software) to fix it.

 

I get the same exact codes but cannot find any bulletin addressing it.

 

I have a '22 PAS. While on a ride to Alaska back in June, I also experienced an unusual startup when it was below 35 degrees F. A warning message appeared on the display and the bike would only stay in "limp" mode. After idling for a minute or so, I turned the bike off, then restarted it with no continuing issue . . . until it dropped below 30 degrees F, where the message reappeared on the display. The bike continued to run without falling back into "limp" mode. I explained this to my dealer service guy and the response was the same as the time I complained about the other electronic gremlins that seem to persist: they couldn't replicate the issue so, therefore, there is no issue. (Grrrrr . . . .)

I love this bike. Not happy about the gremlins, though.