Fork lock code
Thread Starter
|
Stage I
Joined: Apr 2020
Posts: 1
Likes: 0
From: Vermont
Fork lock code
On my 2015 fltruse I’ve gotten a “fork lock” code while riding. The bike shuts down at that point. Some times I can roll on the throttle and it will fire back up. Other times I have to hit the kill switch and turn it back on then start it back up. Has anyone ever had this happen? Remember the fork lock isn’t part of the ignition on the cvo. Thanks for any help.
Road Warrior
Joined: Jun 2009
Posts: 1,514
Likes: 453
From: Canada
Just a suggestion: pull over (or just do it in the driveway, be in neutral and rotate fork lock CCW to lock. Does it do it?
Have a friend or whomever to assist and try it while in gear with clutch pulled in...?
For the lock to engage you need to be full lock left but I dunno if I'd wanna try it by switching it while riding.
Did you do any work recently?
Handlebars? Fairing work? Accessories?
I'm guessing but hopefully just a loose wire. Perhaps a disconnect back to ECM. Faulty switch?
Dunno just guessing. 2015 is quite new still.
Good luck
H
Have a friend or whomever to assist and try it while in gear with clutch pulled in...?
For the lock to engage you need to be full lock left but I dunno if I'd wanna try it by switching it while riding.
Did you do any work recently?
Handlebars? Fairing work? Accessories?
I'm guessing but hopefully just a loose wire. Perhaps a disconnect back to ECM. Faulty switch?
Dunno just guessing. 2015 is quite new still.
Good luck
H
Thread
Thread Starter
Forum
Replies
Last Post
