Do I need anything else?
Thread Starter
|
Club Member
Joined: Feb 2010
Posts: 68
Likes: 12
From: Southern Ohio (Portsmouth)
Do I need anything else?
Picking up a new to me (2012) SE CVO later this week and wondering if I had some $$$ leftover after the deal is there anything I need to add to the bike? It's already had a few items installed. Vance & Hines Monster Ovals, Kuryakyn armrests, tour pak relocater kit and a Clearview Shields recurve. My first Ultra so I've been looking at a few goodies. Magnetic lower fairing flaps and liners and adding the brake light kit to the tour pak rack. Any other suggestions from you CVO veterans?
Grand HDF Member
Joined: Oct 2009
Posts: 3,932
Likes: 882
From: SOON TO BE A SAFE AMERICA
I highly recommend a turner of choice and a new header!
You really need to get rid of the cat. Once you do this you will
have less heat, better preformance, and add more engine life by
having the engine running better and not so lean.
You may want to add a set of the premium tourpak hinges, and detach kit for
the tourpak down the road.
Also being a 2012 model, you may want to look into a regulator. They had ALOT
of bad ones that year.
Just something to think about. Other then that, Congrats and Enjoy
your new scoot!
Ride Safe,
YELLOWBIRD
You really need to get rid of the cat. Once you do this you will
have less heat, better preformance, and add more engine life by
having the engine running better and not so lean.
You may want to add a set of the premium tourpak hinges, and detach kit for
the tourpak down the road.
Also being a 2012 model, you may want to look into a regulator. They had ALOT
of bad ones that year.
Just something to think about. Other then that, Congrats and Enjoy
your new scoot!
Ride Safe,
YELLOWBIRD
Tourer
Joined: Jun 2005
Posts: 498
Likes: 1
From: Rhode Island
On my 2013 Ultra CVO I've done the following:
Took off my 05 and installed on the new bike:
Truc Lite Phase 6 headlight and spots
Brightasslight tail light
Progressive 940's for the rear
Chrome passenger hand rails with grips
Chrome passenger cup holder
Added new
GA relocation kit
Progressive monotube kit lowering front 1"
HD passenger adjustable footpegs
Fuelmoto cermic coated header and jackpot exhaust
PowerVision
Motorcycle Armor for gas tank, side covers, lid covers
Chrome FCS system with thermal switch (not installed yet).
Joe
Took off my 05 and installed on the new bike:
Truc Lite Phase 6 headlight and spots
Brightasslight tail light
Progressive 940's for the rear
Chrome passenger hand rails with grips
Chrome passenger cup holder
Added new
GA relocation kit
Progressive monotube kit lowering front 1"
HD passenger adjustable footpegs
Fuelmoto cermic coated header and jackpot exhaust
PowerVision
Motorcycle Armor for gas tank, side covers, lid covers
Chrome FCS system with thermal switch (not installed yet).
Joe
Road Master
Joined: Apr 2010
Posts: 815
Likes: 28
From: Ontario, Canada
On my 2013 Ultra CVO I've done the following:
Took off my 05 and installed on the new bike:
Truc Lite Phase 6 headlight and spots
Brightasslight tail light
Progressive 940's for the rear
Chrome passenger hand rails with grips
Chrome passenger cup holder
Added new
GA relocation kit
Progressive monotube kit lowering front 1"
HD passenger adjustable footpegs
Fuelmoto cermic coated header and jackpot exhaust
PowerVision
Motorcycle Armor for gas tank, side covers, lid covers
Chrome FCS system with thermal switch (not installed yet).
Joe
Took off my 05 and installed on the new bike:
Truc Lite Phase 6 headlight and spots
Brightasslight tail light
Progressive 940's for the rear
Chrome passenger hand rails with grips
Chrome passenger cup holder
Added new
GA relocation kit
Progressive monotube kit lowering front 1"
HD passenger adjustable footpegs
Fuelmoto cermic coated header and jackpot exhaust
PowerVision
Motorcycle Armor for gas tank, side covers, lid covers
Chrome FCS system with thermal switch (not installed yet).
Joe
Tourer
Joined: Jun 2005
Posts: 498
Likes: 1
From: Rhode Island
a few on my website right after I received the bike. Not all the new stuff is on it in these shots. www.lacascio.com/cvo
Road Master
Joined: Sep 2008
Posts: 1,217
Likes: 48
From: WI
Picking up a new to me (2012) SE CVO later this week and wondering if I had some $$$ leftover after the deal is there anything I need to add to the bike? It's already had a few items installed. Vance & Hines Monster Ovals, Kuryakyn armrests, tour pak relocater kit and a Clearview Shields recurve. My first Ultra so I've been looking at a few goodies. Magnetic lower fairing flaps and liners and adding the brake light kit to the tour pak rack. Any other suggestions from you CVO veterans?
Thread
Thread Starter
Forum
Replies
Last Post
rob_1127
Screamin Eagle CVO Models
22
Jun 28, 2016 10:59 AM
iHarley
Touring Models
6
Oct 12, 2010 12:55 PM
