23" Agitator Install

Reply Subscribe

Thread Tools

Search this Thread

Oct 13, 2013 | 07:28 AM

#121

puzzled1

Thread Starter

Road Captain

Joined: Mar 2013

Posts: 614

Likes: 4

From: Pennsylvania

I changed out my compressor as I thought it wasn't cutting it. I later discovered the original installer was missing a one way valve and that is why the compressor wasn't doing what I needed it to do. My bad for installing the kit right out of the box without checking it out.

Oct 13, 2013 | 07:29 AM

#122

puzzled1

Thread Starter

Road Captain

Joined: Mar 2013

Posts: 614

Likes: 4

From: Pennsylvania

Changed the forward facing air cleaner out for the SE version that matches my front wheel.
Cut up a stock throttle body cover as shown here on the site.

Oct 13, 2013 | 07:30 AM

#123

puzzled1

Thread Starter

Road Captain

Joined: Mar 2013

Posts: 614

Likes: 4

From: Pennsylvania

Awhile back I removed my horn and original motor mount. I had my 13 year old son on the mill goofing around cutting me a motor mount. Over the winter I'll pull it off and radius the edges but for now I'm going to run it as he made it.

Installed my horn. I guess I'll see how bad the water beats up on it. Worse case scenario I'll install one in the fairing like on my 01.

Oct 13, 2013 | 07:30 AM

#124

puzzled1

Thread Starter

Road Captain

Joined: Mar 2013

Posts: 614

Likes: 4

From: Pennsylvania

I added some SE Orange wires along with the head bolt bridges.
I have to either add some wire separators or go and get the OEM wires ties with the Christmas trees on them. For now the double wire tie will suffice.

Oct 13, 2013 | 07:31 AM

#125

puzzled1

Thread Starter

Road Captain

Joined: Mar 2013

Posts: 614

Likes: 4

From: Pennsylvania

I had a solenoid end cap from the building of my chopper so I installed it until I can find an end cap I like.

Oct 13, 2013 | 07:32 AM

#126

puzzled1

Thread Starter

Road Captain

Joined: Mar 2013

Posts: 614

Likes: 4

From: Pennsylvania

I wanted an air gauge for the air ride. I ordered an oil pressure gauge mount and a 100 PSI gauge. I went with the single bolt mount to allow for more mounting possibilities.