Original starter is old and tired armature wobbles and worn bearing and bushing shot needs a complete rebuild most parts are available except I cannot find the brass bushing in the one end it probably an off the shelf bushing., It's such a PIA to get to and for the sake of reliability I'll buy new one. Rebuild my original if for no other reason just to keep the case with the Harley Davidson stamp on it. Did that with my generator a long time ago.
Drag Specialties advertises an OEM high torque replacement, same cost as standard starter. In another post I questioned an AGM battery and going that route and engine compression is around 9:1,
Anyone running one of these? battery or bat cables need upgrade for the high torque option?

Drag Specialties Black High Torque Starter for Models Equipped w/Prestolite Starters

• Feature 15% more power and torque than OEM units
• Manufactured using heavy-duty armature commutators, large drive-end bearings and needle bearings in the com-end caps

 

Don't fall for that "high torque" claim unless you just want bragging rights on how much you spent.

Buy a cheap one off amazon for about $125. I did about 60k miles ago, still turns it well. I'm not one to cheap out, but what works , works.

Just check the end bolts. A 1/4" is a Prestolite. A 5/16" is a Hitachi and the end gear is different.

 

I'm with you on the hype, didn't give amazon a thought. thanks

 

D&D auto electric in west Denver/ Wheatridge works with a lot of older stuff, might have the bushings you need.

 

Just down the road from me , thanks

 

If the busing is a standard size, you can get one from here..

https://www.mcmaster.com/products/bu...ronze+bushings

 

An auto-electric shop should be able to rebuild for not much money. One near me has done my '66, also a '65 Deere 24v backhoe starter, each for under $50. Probably more now.

 

Got my OEM starter down to D&D Auto Electrics no longer cheap to rebuild but it'll get done and I'll another original part saved.

 

I have a good started from a 2019 M8 I would sell cheep.

 

@touchdown Did you forget where you are or just trying to run up you post numbers?