EVO All Evo Model Discussion

Dresser Handlebar Options

Thread Tools
 
Search this Thread
 
Old Oct 30, 2016 | 12:47 PM
  #1  
tbear640's Avatar
tbear640
Thread Starter
|
Intermediate
Joined: Jun 2008
Posts: 41
Likes: 1
From: Rhodes, Michigan
Talking Dresser Handlebar Options

I bought my son a 1997 Dresser and he's 6 foot 5 inches tall. He would like to put handlebars that are taller and wider than the stock ones, any tall riders out there who encountered this problem and changed the handlebars for a more comfortable fit? I am already planning to replace the clutch cable so this would be the time to look at changing the handlebars.
 
Reply
Old Oct 30, 2016 | 01:00 PM
  #2  
MURPHCC1's Avatar
MURPHCC1
Club Member
Joined: Apr 2013
Posts: 5,874
Likes: 3,847
From: Cape Cod
Default

12" Yaffe Monkey bars........very comfortable!!

 
Reply
Old Oct 30, 2016 | 01:53 PM
  #3  
WP50's Avatar
WP50
Seasoned HDF Member
15 Year Member
Photogenic
Photoriffic
Joined: Apr 2011
Posts: 6,185
Likes: 2,134
From: W. Texas
Default

Where's Omaha when ya need him. Probably chasing uh supervising his helpers om the kitchen project.

Here's a good thread of his

https://www.hdforums.com/forum/evo-c...ars-off-8.html


WP
 
Reply
Old Oct 30, 2016 | 02:02 PM
  #4  
misfitJason's Avatar
misfitJason
Seasoned HDF Member
15 Year Member
Liked
Loved
Community Favorite
Joined: Dec 2010
Posts: 6,849
Likes: 1,389
From: Florida
Default

Just pick tall handlebars. In my experience handlebars specifically for touring models are a little wider than say dyna or softail apes. Don't go too crazy 16 inch apes would probably fit the bill
 
Reply
Old Oct 30, 2016 | 06:28 PM
  #5  
tbear640's Avatar
tbear640
Thread Starter
|
Intermediate
Joined: Jun 2008
Posts: 41
Likes: 1
From: Rhodes, Michigan
Default

Yea my kid seems to be leaning strongly towards the Yaffe monkey bars, thanks for the input and suggestions.
 
Reply
Old Oct 31, 2016 | 10:10 AM
  #6  
grbrown's Avatar
grbrown
Club Member
15 Year Member
Liked
Loved
Community Favorite
Joined: Jun 2007
Posts: 45,429
Likes: 2,898
From: Bedford UK
Talking

Originally Posted by tbear640
Yea my kid seems to be leaning strongly towards the Yaffe monkey bars, thanks for the input and suggestions.
Tell him to get his act together and join HDF! Then we can talk to him direct - no offence intended.
 
Reply
Old Oct 31, 2016 | 02:33 PM
  #7  
DeputyLoud's Avatar
DeputyLoud
Road Captain
10 Year Member
Liked
Loved
Community Favorite
Joined: Jul 2014
Posts: 721
Likes: 18
From: Galesville, WI
Default

Just as an add, not to sway you one way or the other. My 10" yaffe bars actually measure out closer to 12" of rise. With my fairing it put my hands just above the edge, but still have decent wind blockage. Any taller and hands would be directly in the wind. Might make a difference on them cold Michigan mornings or nights. Living in WI myself I am glad I did not go any taller. Just something to consider. And this is literally the COOL factor, LOL. No matter which way he goes, anything higher than the stockers are going to be more comfortable. Think I read somewhere that keeping hands just under shoulder height is best? Or hands and elbows should be level? IDK now I am just babbling.

But don't forget that brake lines will most likely also need to be extended. Maybe even throttle cables depending on how high he goes. I am about 6' so taller for your boy would probably be better. My throttle cables were just long enough, any taller and they would have been required to replace. Which I did anyways.

I really like the looks of the monkey bars too. Just decided to go with a more classic look on mine.
 
Attached Thumbnails Dresser Handlebar Options-wp_20150131_18_34_01_pro.jpg   Dresser Handlebar Options-wp_20150418_20_59_23_pro.jpg  

Last edited by DeputyLoud; Oct 31, 2016 at 02:41 PM.
Reply
Old Nov 1, 2016 | 06:47 AM
  #8  
grbrown's Avatar
grbrown
Club Member
15 Year Member
Liked
Loved
Community Favorite
Joined: Jun 2007
Posts: 45,429
Likes: 2,898
From: Bedford UK
Default

The bars he has are adjustable, which many members seem to be unaware of. I couldn't get comfortable on my own bike when I first had it and it took me a while to get around to altering them. Been fine ever since! So he may find he can get comfortable with what he has and save himself some cash.
 
Reply
HD Forum Stories

The Best of Harley-Davidson for Lifelong Riders

story-0

7 Times Harley-Davidson Chucked Tradition Out the Window

 Verdad Gallardo
story-1

7 Surprising Harley-Davidson Products that Are Not Motorcycles

 Verdad Gallardo
story-2

8 Best Harley-Davidson Motorcycles Ever

 Pouria Savadkouei
story-3

10 Worst Harley-Davidson Motorcycles Ever

 Pouria Savadkouei
story-4

Killer Custom's Jail Break Is The Breakout That Refused to Blend In

 Verdad Gallardo
story-5

Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?

 Verdad Gallardo
story-6

Harley-Davidson Reveals Super Cool Cafe Racer Concept

 Verdad Gallardo
story-7

Engraved Rebellion: Inside Bundnerbike's Glam Rock II

 Verdad Gallardo
story-8

10 Motorcycles You Should Never Buy

 Joe Kucinski
story-9

10 Things Harley-Davidson Needs to Fix in 2026

 Verdad Gallardo
Old Nov 1, 2016 | 09:40 AM
  #9  
marktruckee's Avatar
marktruckee
Cruiser
10 Year Member
Liked
Joined: Sep 2011
Posts: 101
Likes: 9
From: Truckee
Default

Originally Posted by DeputyLoud
Just as an add, not to sway you one way or the other. My 10" yaffe bars actually measure out closer to 12" of rise. With my fairing it put my hands just above the edge, but still have decent wind blockage. Any taller and hands would be directly in the wind. Might make a difference on them cold Michigan mornings or nights. Living in WI myself I am glad I did not go any taller. Just something to consider. And this is literally the COOL factor, LOL. No matter which way he goes, anything higher than the stockers are going to be more comfortable. Think I read somewhere that keeping hands just under shoulder height is best? Or hands and elbows should be level? IDK now I am just babbling.

But don't forget that brake lines will most likely also need to be extended. Maybe even throttle cables depending on how high he goes. I am about 6' so taller for your boy would probably be better. My throttle cables were just long enough, any taller and they would have been required to replace. Which I did anyways.

I really like the looks of the monkey bars too. Just decided to go with a more classic look on mine.

DeputyLoud- which Yaffe bars did you go with? What is model and year of your bike?
 
Reply
Old Nov 1, 2016 | 04:13 PM
  #10  
0maha's Avatar
0maha
Seasoned HDF Member
10 Year Member
Liked
Loved
Community Favorite
Joined: Nov 2012
Posts: 6,555
Likes: 4,805
From: Omaha
Default

Originally Posted by WP50
Where's Omaha when ya need him. Probably chasing uh supervising his helpers om the kitchen project.

Here's a good thread of his

https://www.hdforums.com/forum/evo-c...ars-off-8.html
Heh.

Yeah, I went with the Wild1 12.5" bars. Really like them. But then, I'm no where near 6'5".

IMHO, the problem with picking bars is you really just can't say if you like them until you've put some real miles on them. What feels good in the dealership showroom may be torture after 200 miles.

I know on mine when I first put the 12.5's on, they felt sky high. Comfortable, but pretty weird to ride. Now, something like 10k miles or so later, they feel perfectly natural. You just never know what you will get used to.
 
Reply



All times are GMT -5. The time now is 06:31 PM.

story-0
7 Times Harley-Davidson Chucked Tradition Out the Window

Slideshow: Harley-Davidson built its reputation on nostalgia, but every so often, the company took a hard left turn into the future.

By Verdad Gallardo | 2026-05-20 11:18:19


VIEW MORE
story-1
7 Surprising Harley-Davidson Products that Are Not Motorcycles

Slideshow: The bar-and-shield logo shows up on far more than motorcycles, some of the company's most unexpected products have nothing to do with riding.

By Verdad Gallardo | 2026-04-29 16:50:35


VIEW MORE
story-2
8 Best Harley-Davidson Motorcycles Ever

Slideshow: Not every Harley gets it right, but these are the ones that genuinely earned their reputation.

By Pouria Savadkouei | 2026-04-15 14:23:21


VIEW MORE
story-3
10 Worst Harley-Davidson Motorcycles Ever

Slideshow: From the troubled AMF years to modern misfires, these bikes earned reputations for reliability issues, questionable engineering, or disappointing performance.

By Pouria Savadkouei | 2026-04-01 20:01:09


VIEW MORE
story-4
Killer Custom's Jail Break Is The Breakout That Refused to Blend In

Slideshow: Killer Custom's "Jail Breaker" build focuses more on stance and visual aggression than mechanical overhaul.

By Verdad Gallardo | 2026-03-18 19:20:32


VIEW MORE
story-5
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?

Slideshow: The Swiss custom shop has taken a Harley Softail and stretched it into something so long and low that it looks closer to a rolling sculpture than a conventional motorcycle.

By Verdad Gallardo | 2026-03-07 16:15:30


VIEW MORE
story-6
Harley-Davidson Reveals Super Cool Cafe Racer Concept

Slideshow: Harley-Davidson's new RMCR concept revives the café racer formula with modern hardware-and it may be exactly the reset the company needs.

By Verdad Gallardo | 2026-03-04 12:23:37


VIEW MORE
story-7
Engraved Rebellion: Inside Bundnerbike's Glam Rock II

Slideshow: A standard cruiser becomes an intricate metal canvas in the hands of a Swiss custom house known for pushing Harley-Davidson platforms far beyond their factory brief.

By Verdad Gallardo | 2026-02-24 18:19:44


VIEW MORE
story-8
10 Motorcycles You Should Never Buy

Slideshow: There is no shortage of great motorcycles to buy, but we would avoid these ten.

By Joe Kucinski | 2026-02-19 14:50:51


VIEW MORE
story-9
10 Things Harley-Davidson Needs to Fix in 2026

Slideshow: Harley-Davidson's challenges aren't abstract; they show up in dropping shipments, shrinking dealer traffic, and strategic decisions that aren't yet translating into growth.

By Verdad Gallardo | 2026-01-13 18:33:17


VIEW MORE