When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Trying to chase down an erratic idle issue. Pulled the air screw out and I thought there was suppose to be an "o-ring" on the end of it. This has more of a stepped rubber washer. Could this be the issue? I've attached pics as good as I can get. Lemme know. Thanks
Not sayin I fixed it but I reseated and cleaned off a tiny burr the little "oring" and it's idlin a lot more consistent now. So hopefully when the rebuild happens it'll be golden.
Not sayin I fixed it but I reseated and cleaned off a tiny burr the little "oring" and it's idlin a lot more consistent now. So hopefully when the rebuild happens it'll be golden.
When you rebuild and the opening for that mixture screw is big enough__ a Qtip and some polishing compound (car wax stuff) can possibly clean up what might have burred that o ring.
have done that to more than one needle seat on a carb
When you rebuild and the opening for that mixture screw is big enough__ a Qtip and some polishing compound (car wax stuff) can possibly clean up what might have burred that o ring.
have done that to more than one needle seat on a carb
WP
^^^This^^^
Make sure you get polishing compound and not rubbing compound!!!!!
Slideshow: From the troubled AMF years to modern misfires, these bikes earned reputations for reliability issues, questionable engineering, or disappointing performance.
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Slideshow: The Swiss custom shop has taken a Harley Softail and stretched it into something so long and low that it looks closer to a rolling sculpture than a conventional motorcycle.
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Slideshow: A standard cruiser becomes an intricate metal canvas in the hands of a Swiss custom house known for pushing Harley-Davidson platforms far beyond their factory brief.
Slideshow: Harley-Davidson's challenges aren't abstract; they show up in dropping shipments, shrinking dealer traffic, and strategic decisions that aren't yet translating into growth.
Does this look right?
