For the sake of us folk with older scoots, could one of you who owns a Wide Gide and who has a service manual that lists critical fasteners reproduce that list here? I'm sure many people would find it very useful.

I have a 98 Wide Glide, and the manual says to "torque all fasteners, except head bolts, to specifications." That's a lot of bolts! As I understand it, the SM for newer models actually specifies a list of critical fasteners that should be checked.

As an example of what I'm talking about, below is the list of CF's for an '09 Electra Glide Standard, which I found in another thread.

================================================== ==

'09 Electra Glide Standard Critical Fasteners
Hand Controls
Switch Housing
Clutch lever bracket handlebar clamp screws
Master cylinder reservoir handlebar clamp screws
.
Brakes
Brake caliper banjo bolts
Master cylinder banjo bolts
ABS module banjo bolts
Front brake disc screws
Rear brake disc screws
Front master cylinder reservoir cover screws
Rear master cylinder reservoir cover screws
Rear master cylinder to frame screws
Front brake caliper mounting screws
Rear brake caliper to caliper bracket screws
Brake caliper pad pin
.
Axle nuts
Front
Rear
.
Front forks
Front axle holder nuts
.
Pivot shaft
Locknuts
Rear fork bracket bolts
.
Other Transmission to engine bolts
Rear Frame Bolts
.
Engine mount bolts
Top stabilizer link to frame
Top stabilizer link to engine mounting bracket bolt
Front engine mount bracket bolts (2)
Front engine mount end cap bolts (3)
Rear frame to main frame (3-each side)

 

Hey Z would a 06 WG CF help you out i can fax it to you or email it?

 

RJSOGARD: On 06 CF llist would be great. You can email it to czissman@hotmail.com? Thanks!

 

I have a '97 Wide Glide...I'll bring my repair manual in to work and send the info to your email.

 

Interesting: Mine is a 98 and I don't see a critical fasteners list in my SM, yet your 97 manual has one? That's odd: I wonder if I'm just not seeing it.

 

hey z i will send it out tommarrow at work ok?

 

RJSOGARD: Tomorrow is fine; I appreciate it!

 

Here's the list of critical fasteners for an 06 Dyna (Thanks RJSOGARD!):

http://www.bafpg.com/downloads/06_dyna_cf.pdf

When GREENOHAWK69 is able to compile his list, I'll post that here too. (Thanks in advance for that, GREENO!)

 

No, you are correct. I don't have a "critical fastners" list in my manual (which covers the '97 and '98 WG). The only list I have is for Fastner Torque Values on page 1-9. You have to go through each section to find out what you need to check.