KlockWerks Heritage Windshield
Thread Starter
|
Seasoned HDF Member
Joined: May 2018
Posts: 5,814
Likes: 7,142
From: Las Vegas
KlockWerks Heritage Windshield
I'm looking for reviews on the KlockWerks Billboard Flare windshield if anyone has tried one on a Heritage. Like it or hate it, I'd like to hear about it.
https://getklocked.com/products/bill...arley-davidson
https://getklocked.com/products/bill...arley-davidson
Advanced
Joined: Oct 2021
Posts: 57
Likes: 27
From: Foothills of the Adirondacks
I have a 21" light tint. At 6'3", I can see over the top no problem. It's a light tint, I think I'd go for the clear if I were to do it again. In combination with the fangs I have installed on my 21 Heritage, it blocks a lot of wind, so much so, I use it only when the temps are below 70. Wind is well above my helmet. Decent protection for the hands. I think it's a good quality windshield.
Good luck.
Good luck.
Stellar HDF Member
Joined: Oct 2005
Posts: 2,377
Likes: 223
I know its an old thread, did not want to start a new one. Bought a 21" clear. I'm 6' and can see over it. It is so much better out on the highway compared to the stock shield. The reduction in buffeting is awesome, no more blurry sunglasses and my head bobbeling at any speed over 60. I have no need to add fangs or anything else now.
Road Warrior
Joined: Aug 2009
Posts: 1,317
Likes: 578
From: Ft Smith Arkansas
Buffeting
I know its an old thread, did not want to start a new one. Bought a 21" clear. I'm 6' and can see over it. It is so much better out on the highway compared to the stock shield. The reduction in buffeting is awesome, no more blurry sunglasses and my head bobbeling at any speed over 60. I have no need to add fangs or anything else now.
Thread
Thread Starter
Forum
Replies
Last Post
Grey Biker
Want To Buy Motorcycles/Parts/Accessories
0
Nov 26, 2006 10:11 PM
