Fuel pump not priming
Thread Starter
|
Road Warrior
Joined: May 2010
Posts: 1,718
Likes: 15
From: Bay area, CA
Fuel pump not priming
What's up guys, I'm throwing this out there for a buddy of mine. 02 fatboy 40k on the clock and a power commander. Just did cam tensioners, put the bike back together and the fuel pump don't run. Only thing he did to the fuel system was disconnect the petcock on the tank, and all electrical connections are sound. When he turns the ignition on he's got power at the plug and then after a few seconds the the system relay kicks off and he loses power. Even when plugged in the fuel pump doesn't run before the relay kicks off. Everything else has power and the bike runs with a few squirts of gas, and the bike ran prior to the work. Help me out!! Thanks in advance
Thread
Thread Starter
Forum
Replies
Last Post
hogrider03
Ignition/Tuner/ECM/Fuel Injection
3
May 17, 2013 11:57 AM
