2012 FatBoy - wanting to install LED brake/blink
Thread Starter
|
3rd Gear
Joined: May 2014
Posts: 7
Likes: 0
From: Salem CT
2012 FatBoy - wanting to install LED brake/blink
Hi there, I searched but didn't see anything that answered my question, so I apologize if I missed it.
I have a 2012 FatBoy. I am adding hard bags with LED lights. I would like them to be blinkers & brake lights, and I'm having trouble finding any wiring information. Can someone give me some insight of where to splice into?
The LED's have 3 wires, white (Neg) Black (Pos, stage 1: on) and red (Pos, stage 2: on brighter)
I also purchased the load resistors.
Thanks in advance.
I have a 2012 FatBoy. I am adding hard bags with LED lights. I would like them to be blinkers & brake lights, and I'm having trouble finding any wiring information. Can someone give me some insight of where to splice into?
The LED's have 3 wires, white (Neg) Black (Pos, stage 1: on) and red (Pos, stage 2: on brighter)
I also purchased the load resistors.
Thanks in advance.
Thread Starter
|
3rd Gear
Joined: May 2014
Posts: 7
Likes: 0
From: Salem CT
Thanks Misbehaven, I appreciate the recommendation, though I was hoping someone could help me with the wiring, I wasn't expecting to have to buy another component.
I've spent so much already, I really thought that taking the stock blinkers off and replacing them with an LED would be simple. thanks.
I've spent so much already, I really thought that taking the stock blinkers off and replacing them with an LED would be simple. thanks.
Thread
Thread Starter
Forum
Replies
Last Post
Odabe
Electrical/Lighting/Alarm
0
May 14, 2015 08:39 AM
