headlight on springer question?
Thread Starter
|
6th Gear
Joined: Feb 2007
Posts: 10
Likes: 0
From: Western Ma
headlight on springer question?
My headlight keeps going out on my springer and when i pulled the headlight apart it appears that the harness doesnt snap all the way in tight. The rubber around the housing looks new and doesnt let the 3 progs stay tight, i've even used electrical tape to hold it together but to no avail. The vibration just keeps unsnapping it for some reason, anyone with a springer run into this problem before?
[IMG]local://upfiles/25332/3115704AAD414FB4A24673458A9A8A88.jpg[/IMG]
[IMG]local://upfiles/25332/3115704AAD414FB4A24673458A9A8A88.jpg[/IMG]
Road Warrior
Joined: Apr 2007
Posts: 1,737
Likes: 0
From:
RE: headlight on springer question?
No but mine rattles & bounces like a sumbitch, Im having my dealer check it out on my 7500 mi service, it seems messed up to me, I have heard of this problem though, but unfortunately never found out what was done to do it
[IMG]local://upfiles/30482/AA7DAE03E0AF475A87DB80924AA5C880.jpg[/IMG]
[IMG]local://upfiles/30482/AA7DAE03E0AF475A87DB80924AA5C880.jpg[/IMG]
Thread Starter
|
6th Gear
Joined: Feb 2007
Posts: 10
Likes: 0
From: Western Ma
RE: headlight on springer question?
I fixed the problem I hope, I pulled the headlight off again and pulled the rubber housing back as far as it could go to reveal the 3 progs better. I pushed the progs on as tight as I could and it actually snapped very tight so hopefully it doesnt unplug again.....
Thread
Thread Starter
Forum
Replies
Last Post
