Turn signals
Thread Starter
|
Stage II
Joined: Apr 2019
Posts: 2
Likes: 0
From: IL
Turn signals
My 1994 Heritage has a bug. The turn signals work normally in accessories, but when I switch it to run the left side works normal, but the right side flashes very slowly then sometimes stops. Any help would be appreciated.
Seasoned HDF Member
Joined: Sep 2008
Posts: 14,158
Likes: 11,249
From: San Diego, CA
If the signals work normally in ACC but not in RUN on the main ignition switch, the only difference/change is the power going through a different leg of the switch.... My first suspect would be the ignition switch....
I'd first check to see if the ignition switch wires are all clean and tightly connected. If they all checked out good, I would disassemble, inspect, and then completely clean/lube the switch. If that doesn't work, or if I found some obvious worn out/broken contacts, I'd buy a new switch....
Last edited by hattitude; Apr 20, 2019 at 04:47 PM.
Thread
Thread Starter
Forum
Replies
Last Post
ericj205
Dyna Glide Models
0
Mar 21, 2018 12:50 PM
