Luggage rack question
Thread Starter
|
Intermediate
Joined: Apr 2007
Posts: 30
Likes: 0
From:
Luggage rack question
I bought a HD #57318-04 (chrome) luggage rack from a private party, new condition, never installed with the hardware. Included was a set of foam "gaskets" or probably an anti rattle strips. They are odd sized, and no obvious way to install/mount them, without them hanging out...Does any one happen to have a copy of the installation instructions to guide me as to where to put these?
Thanks in advance!
Thanks in advance!
Grand HDF Member
Joined: Dec 2004
Posts: 4,513
Likes: 4
From: Midland, TX
RE: Luggage rack question
Maybe after the install, they are trimmed. A lot of the HD parts are multi fit so sometimes there's a few extra parts in the kit or something that needs slight modification.
Novice
Joined: Aug 2006
Posts: 16
Likes: 0
RE: Luggage rack question
Instructions attached. The foam gaskets actually go over the 2 bottom screw heads on the sissy bar. It is not real clear in the instructions but simple enough. If still not clear post another question and I will try to explain.
Cruiser
Joined: Jul 2007
Posts: 233
Likes: 0
From: MI
RE: Luggage rack question
Just put a rack on last week. The padding strips keep you from banging the bottom of the sissy bar edges on your fender if you are using quick disconnect sideplates. I peeled the cutout holes of from the pads, didn't need to, stuck em back on there sort of.
Thread
Thread Starter
Forum
Replies
Last Post
