Hi Guys: I'm gifting a battery tender to a buddy of mine and installing it for him. He's got a 2006 Softail Standard. I've only owned Dynas myself, so I'm wondering if there's any preferred way to route the wiring on a Softail so it's easy to get to, but unobtrusive at the same time?

Thanks.

 

I always install mine under edge of seat.

 

Mine just dangles out the left side fwd on the oil bag and is just long enough so the heavy capped plug if I tuck it behind coil cover catches there.

 

 

I have mine zip-tied under the coil.

 

Thanks guys. I appreciate it.

 

I route the battery tender pigtail so it exits the right side under the seat and behind the oil bag like 04FXDI shows. I route the jump start pigtail out the left side the same way.

 

How big a gage is your jump start pigtail? Actually one could use it for charger. As long as your attachment reverses for the doaner battery. I would recommend never jumping a Harley except in an emergency.

 

The pigtail I use to jump the bike is for the Antigravity XP-10 micro jump starter. I don't know what gauge the jump start pigtail is but it is much heavier than a tender pigtail. This is the jump start pigtail. It is specific for that jump start model.