J&M CB
Thread Starter
|
Cruiser
Joined: Apr 2007
Posts: 100
Likes: 0
J&M CB
I ride a road glide with factory CB, I bought the J&M CB module for her Fatboy so we can have bike to bike on trips. Got her an antenna with license plate mount, but having a hard time trying to find a switched ac lead for the power to the CB radio. It's an 07 fatboy and I noticed in the wiring diagram that in the fuse box there is an used fuse postion, C to D, has the power coming in one side, but no wire shown coming out, Seems this would work but any suggestions from on you wizards would be welcomed.
CharlieChan
CharlieChan
May our Moderator Rest in Peace
Joined: Sep 2006
Posts: 11,386
Likes: 35
From: Rochester, NY
RE: J&M CB
I looked in my manual and all it says for that connection is P&A IGN, I can't figure out what the heck thatmeans or if anything is hooked up to it. So if you can confirm that there isn't anything hooked up to it, I say go for it. I doubt its going to affect anything if there's nothing attached to it.
See if there is a fuse in there first. Itsvery uncommonto find fuses in circuits that do nothing or go nowhere.
See if there is a fuse in there first. Itsvery uncommonto find fuses in circuits that do nothing or go nowhere.
Thread
Thread Starter
Forum
Replies
Last Post
