quiet baffles
Intermediate
Joined: Jan 2008
Posts: 40
Likes: 0
From:
RE: quiet baffles
Baffle change
leave heat shields on
remove slash tips no brainer
Get large slot screwdriver try to get between pipe and baffle make a little burr
Get some long nose vise grips spray some WD 40 or something in for slide
Grap on pull
I used a little more tape on the baffle fabric so it slide in better
It burns off
leave heat shields on
remove slash tips no brainer
Get large slot screwdriver try to get between pipe and baffle make a little burr
Get some long nose vise grips spray some WD 40 or something in for slide
Grap on pull
I used a little more tape on the baffle fabric so it slide in better
It burns off
Extreme HDF Member
Joined: Aug 2007
Posts: 15,664
Likes: 22
From: st.louis MO
RE: quiet baffles
I changed mine last week and it took me about 20 mins a side .I had to remove my heat shields but it was still very easy. any questions pm me and will tell how I did iy.
Thread
Thread Starter
Forum
Replies
Last Post
