Beach bars
Thread Starter
|
Cruiser
Joined: May 2006
Posts: 177
Likes: 1
From: Springfield,IL
Beach bars
Go a set of these from Drag Specialties
BEACH BARS (39.5” WIDE, 9.5” CENTER WIDTH, 4.5” RISE, 14.75” PULLBACK)
 \\;
Can anyone help me with cable lengths, I plan on using 1 1/2" risers
Thanks Rich
BEACH BARS (39.5” WIDE, 9.5” CENTER WIDTH, 4.5” RISE, 14.75” PULLBACK)
 \\;
Can anyone help me with cable lengths, I plan on using 1 1/2" risers
Thanks Rich
Road Master
Joined: Jun 2007
Posts: 852
Likes: 3
RE: Beach bars
rich,
I would put the risers/handlerbars on, and then measure up what you need. \\; Unless someone has done the exact setup before, you may not get it right. \\; My $.02.. \\;
Go internal and Stainless if you can.. \\; Will look real niiiiice!! \\; If you need help or guidance with internal wiriing (may need to extend the wiring), let me or this forum know. \\; We got experience and short-cuts that you can draw on...
Good luck and take your time...
ronyd
I would put the risers/handlerbars on, and then measure up what you need. \\; Unless someone has done the exact setup before, you may not get it right. \\; My $.02.. \\;
Go internal and Stainless if you can.. \\; Will look real niiiiice!! \\; If you need help or guidance with internal wiriing (may need to extend the wiring), let me or this forum know. \\; We got experience and short-cuts that you can draw on...
Good luck and take your time...
ronyd
Thread
Thread Starter
Forum
Replies
Last Post
matwal84
Softail Parts
12
Jan 31, 2012 05:10 PM
