Fatboy needs passenger floorboards
Thread Starter
|
Cruiser
Joined: Sep 2005
Posts: 193
Likes: 0
From: Okeechobee, Fl. Top of the lake
Fatboy needs passenger floorboards
I have an '05 Fatboy and want to replace the passenger pegs for floorboards. Can anyone tell me what I need to get to convert this over? I have already installed Deluxe pipes because the origional looke like crap and will not accept floorboards
Banned Camp
Joined: Mar 2007
Posts: 526
Likes: 0
From: Gainesville, VA
You have to get the rear passenger mounts and the rear passenger floorboards. You can order them from HD, but it's pretty expensive.
I went with the Kuryakyn ISO wing mini-boards (p/n 4450), $98.00, which are a direct mount to the rear footpeg mounts.
I went with the Kuryakyn ISO wing mini-boards (p/n 4450), $98.00, which are a direct mount to the rear footpeg mounts.
Ultimate HDF Member
Joined: Feb 2008
Posts: 5,615
Likes: 9
From: Escondido, CA
The floorboards from Harley that are for the early bikes up to 99 will fit your bike. Try to find some in the discount bin or table when you visit dealers. Or try ebay. I got a set for my Heritage for $100.
Stage IV
Joined: Apr 2007
Posts: 4
Likes: 0
From: Sparks NV
I set up my'04 FatBoy with a set I found on ebay off a Heritage. Paid about 100 bucks with shipping. Take off your footpegs.Install the mounts with two bolts and a nut I believe. Way easy. I did however modify the mount slightly at a later date to allow the footboard to fit closer to the bike. A very minor undertaking that called for a grinder and a marker. Personal preferenceand not at all necissary.
Thread
Thread Starter
Forum
Replies
Last Post
