When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Hi there, I have an '09 FatBoy. I'm changing my stock air cleaner to a Screamin Eagle setup. Well, when I just removed the stock oval backing plate, and there was a molex type connector inserted into the back/lower/center of the plastic housing. It's just a terminated end cap. It came off with no trouble. It's now just hanging there with no provision in the new chrome backing plate to secure it. Does anyone know what I'm supposed to do with it? Any help would be great, thanks, JR
PS: I'll go take a few pics......
In one picture I'm showing the stock backing plate, and the nipple at the bottom is the hole that held the connector in question.
Something to do with the Euro bikes breather for intake silencing with a different breather package. Not used in north america. Just zip tie it off and ride on.
Ron
Just found out: That electrical plug is only used on California models, to close the throttle plate so fumes do not escape into the atmosphere, when the bike is shut off. I zip-tied it to another molex type connector on the throttle body, and it's well hidden. The adhesive clip was not in my kit, but I understand that the newer kits are supposed to have a clip included. Install done, and it looks great tucked downstairs by my woodstove. We are in 10 feet of snow up here in Canada, so it'll be a few months before there is any riding up here. Thanks for everyones help. First day on here. JR
Something to do with the Euro bikes breather for intake silencing with a different breather package. Not used in north america. Just zip tie it off and ride on.
Ron
Right you are. Zip tie it ouit of the way never to be heard from again.
Slideshow: From the troubled AMF years to modern misfires, these bikes earned reputations for reliability issues, questionable engineering, or disappointing performance.
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Slideshow: The Swiss custom shop has taken a Harley Softail and stretched it into something so long and low that it looks closer to a rolling sculpture than a conventional motorcycle.
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Slideshow: A standard cruiser becomes an intricate metal canvas in the hands of a Swiss custom house known for pushing Harley-Davidson platforms far beyond their factory brief.
Slideshow: Harley-Davidson's challenges aren't abstract; they show up in dropping shipments, shrinking dealer traffic, and strategic decisions that aren't yet translating into growth.