Front LED indicators

Reply Subscribe

Thread Tools

Search this Thread

Apr 29, 2009 | 01:41 AM

j33ptj

Thread Starter

Road Warrior

Joined: Jul 2008

Posts: 1,472

Likes: 126

From: The Netherlands

Front LED indicators

What is involved wiring wise to install front LED indicators to replace HD bulbs.

Is a equaliser required?

Thanks for info

Robert

Apr 29, 2009 | 06:17 AM

Hankster76

Cruiser

Joined: Jul 2008

Posts: 142

Likes: 0

From: Willis Tx.

I had to drill a hole in My bars and ran the wires internally and the base of my turn signals covered the holes..

Apr 29, 2009 | 07:54 PM

j33ptj

Thread Starter

Road Warrior

Joined: Jul 2008

Posts: 1,472

Likes: 126

From: The Netherlands

Hankster did you need to install an equalizer or something?

Thnx
Robert

Apr 29, 2009 | 07:58 PM

crazybastid83

Banned

Joined: Oct 2006

Posts: 660

Likes: 4

From: NJ

Yes you need an equalizer. I like regular bulbs, they go out replace them at any auto parts store. Led lights during the day are not very bright, at night extremely bright.

May 1, 2009 | 12:39 AM

Toneaero

Cruiser

Joined: Jun 2008

Posts: 208

Likes: 1

From: MN

Quote:

Originally Posted by j33ptj

What is involved wiring wise to install front LED indicators to replace HD bulbs.

Is a equaliser required?

Thanks for info

Robert

Just plug and play. The ECM on the Rocker will automatically compensate for the different power draw. Check out my post #28 at this link: https://www.hdforums.com/forum/softa...l-bulbs-3.html

There is a sequence you have to do though. Once you have the LEDs plugged into the stock housing, you have to cycle the left and right turn lights a couple of times, activate the hazards, and turn it off. That sequence worked for me.