Carlini Clean Sweep - Fatboy

Reply Subscribe

Thread Tools

Search this Thread

Feb 5, 2010 | 09:56 PM

sym95734

Thread Starter

Intermediate

Joined: Aug 2009

Posts: 46

Likes: 0

Carlini Clean Sweep - Fatboy

Hi, I am getting the Carlini Clean Sweep 9" rise for my fatboy but not sure if the stock wires are long enought for the 9" rise.

Anyone have experience with the 9" rise installation with the stock wire? If I need to extend the wire, I am not sure how!

Any advise will be appreciated
Thanks for the help
Stephane

Feb 5, 2010 | 10:18 PM

DR. V-TWIN

Former Sponsor

Joined: Jan 2009

Posts: 19,364

Likes: 40

From: Los Angeles, CA

The stock wires "should" be long enough but don't quote me on that just yet.

Feb 6, 2010 | 04:41 AM

olongapo1

Road Master

Joined: Oct 2008

Posts: 970

Likes: 19

From: Philippines

SYM,

I just installed 10 Inch (Internally Wired) T-Bars on my Night Train so I know your dilemma. After numerous hours of research I finally gave up and ordered several sets of wiring kits from J&P prior to starting the project.

4 inch Handlebar Wiring Extensions # 382-101.
8 inch Handlebar Wiring Extensions # 300-253

These are relatively cheap and I ended up utilizing the 4 inchers.

Feb 6, 2010 | 06:43 AM

CycleDrider

Road Master

Joined: Mar 2005

Posts: 818

Likes: 0

From: Jersey Shore

Well mine reached with standard fatboy bars not sure about your Fat-LO bars. You might want to get as suggested some extensions and take it from there.

Feb 6, 2010 | 06:53 AM

gunner065

Road Captain

Joined: Jun 2007

Posts: 734

Likes: 1

From: Nova Scotia

I have White Bros drags (9" rise, 6" pull back) on my fatty. The used the stock wiring no problemswhat so ever. All internally wired except for the TS which I relocated.