When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I was going to do it yesterday, but i need some more fork oil, and every place was closed sunday and monday for labor day..so i'm holding off and might be able to do it this weekend
Not having luck in a Thread so I thought I should throw it out there knowing I will get help from fellow Lo riders.
I was out riding yesterday and my throttle cable broke at the induction module. Thought this was odd seeing it's a 2010 Fatboy Lo with only 8200 miles. Questions I have are:
1) Do you need to remove the tank to change the cable (I had just filled up 10 miles prior and don't really want to drain the tank)?
2) Do you usually change both cables or just the broken one?
3) Any tips---is it a pain in the *** or an easy change?
Thanks
You might as well replace them both if you are going to have them apart. You do not need to remove the tank, it is best IMO if you at least undo it as if you are doing bars and slide it back. Take your air cleaner off and the cable ends are right there. If you tie a piece of wire or something as you pull it out, you can then tie it to the new one and pull it back through. Shouldn't take more than a couple hours if you take your time.
You might as well replace them both if you are going to have them apart. You do not need to remove the tank, it is best IMO if you at least undo it as if you are doing bars and slide it back. Take your air cleaner off and the cable ends are right there. If you tie a piece of wire or something as you pull it out, you can then tie it to the new one and pull it back through. Shouldn't take more than a couple hours if you take your time.
Whoa...just got to the end! I literally read every single post from the beginning....ALL 4100 of them! I am getting together my wish list for my 'end of deployment 2011/2012' present! I was looking at the SG, but this thread has definitely swayed me toward the RIGHT ride! Until I make my purchase, my list will continue to grow! Thanks for all the info guys!!
Whoa...just got to the end! I literally read every single post from the beginning....ALL 4100 of them! I am getting together my wish list for my 'end of deployment 2011/2012' present! I was looking at the SG, but this thread has definitely swayed me toward the RIGHT ride! Until I make my purchase, my list will continue to grow! Thanks for all the info guys!!
***correction....ALL 4101 OF THEM!***
Welcome to the forum and Thank You for your service. I hope you make it home safe and whole.
Congratulations on reading the entire thread. Do your self a favor and put a service manual at the top of your list. Then just watch your bank account drain and your credit cards run up. This forum as you can tell will be expensive. LOL
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Slideshow: The bar-and-shield logo shows up on far more than motorcycles, some of the company's most unexpected products have nothing to do with riding.
Slideshow: From the troubled AMF years to modern misfires, these bikes earned reputations for reliability issues, questionable engineering, or disappointing performance.
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Slideshow: The Swiss custom shop has taken a Harley Softail and stretched it into something so long and low that it looks closer to a rolling sculpture than a conventional motorcycle.
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Slideshow: A standard cruiser becomes an intricate metal canvas in the hands of a Swiss custom house known for pushing Harley-Davidson platforms far beyond their factory brief.
Slideshow: Harley-Davidson's challenges aren't abstract; they show up in dropping shipments, shrinking dealer traffic, and strategic decisions that aren't yet translating into growth.