2007 front wheel ??

frolicuk@pdonline.co.uk · 2010-05-17 18:27:04

https://farm5.static.flickr.com/4103/5092056149_c7fd341be2.jpg PDC_1353 by frolicuk2001, on Flickr

Reply Subscribe

Thread Tools

Search this Thread

Oct 18, 2010 | 01:13 AM

#11

frolicuk@pdonline.co.uk

Thread Starter

Novice

Joined: Apr 2010

Posts: 17

Likes: 0

From: UK

one more

http://www.flickr.com/photos/26706123@N02/5092056149/http://www.flickr.com/photos/26706123@N02/5092056149/ by http://www.flickr.com/people/26706123@N02/, on Flickr

Oct 18, 2010 | 03:10 AM

#12

Earl IV

Tourer

Joined: Jul 2010

Posts: 353

Likes: 0

From: Land of the black buggy

Nice ride, did you just swap the lowers for touring tubes?

I'm planning a dual brake conversion for my Lo this winter assuming I can round up all the pieces.

Oct 18, 2010 | 03:47 AM

#13

frolicuk@pdonline.co.uk

Thread Starter

Novice

Joined: Apr 2010

Posts: 17

Likes: 0

From: UK

relpy

Hi Earl

With the 2007 models the front wheel is offset so I fitted tourer fork bottoms 2" over cow bells and had the fork legs and calipers milled to take 3mm off each to centre the tourer calipers.

Also had to have one off spacers made to centre the wheel and a set of brackets from harley for the fender.

I dont think you will have the problem with the front off centre on your bike so should be OK you just need to check the caliper spacing

Oct 18, 2010 | 04:00 AM

#14

frolicuk@pdonline.co.uk

Thread Starter

Novice

Joined: Apr 2010

Posts: 17

Likes: 0

From: UK

Earl

Also had to upgrade the master cylinder and get a new set of lines.

Otherwise that was it. Most of the time was spent sourcing parts bit by bit

Frol