Heritage with 4" pull back risers
Banned
Joined: Sep 2009
Posts: 7,580
Likes: 7
From: The Internet (& Dyer, Indiana)
My bars fit me almost perfect as is.
But being **** and all, I have issues with the word "almost".
Will be looking for that side shot to get posted before I lock in my decision.
I already have a set of 4 inch pullback risers on my shelf.
Would have put them on two years ago, had I known I didn't need cables.
My last handlebar swap (previous bike) took me to the cleaners with all the extra cables and wire extension kits. Shell shocked. LOL
But being **** and all, I have issues with the word "almost".
Will be looking for that side shot to get posted before I lock in my decision.
I already have a set of 4 inch pullback risers on my shelf.
Would have put them on two years ago, had I known I didn't need cables.
My last handlebar swap (previous bike) took me to the cleaners with all the extra cables and wire extension kits. Shell shocked. LOL
Thread Starter
|
Cruiser
Joined: Aug 2010
Posts: 105
Likes: 2
From: NC
My bars fit me almost perfect as is.
But being **** and all, I have issues with the word "almost".
Will be looking for that side shot to get posted before I lock in my decision.
I already have a set of 4 inch pullback risers on my shelf.
Would have put them on two years ago, had I known I didn't need cables.
My last handlebar swap (previous bike) took me to the cleaners with all the extra cables and wire extension kits. Shell shocked. LOL
But being **** and all, I have issues with the word "almost".
Will be looking for that side shot to get posted before I lock in my decision.
I already have a set of 4 inch pullback risers on my shelf.
Would have put them on two years ago, had I known I didn't need cables.
My last handlebar swap (previous bike) took me to the cleaners with all the extra cables and wire extension kits. Shell shocked. LOL
Banned
Joined: Sep 2009
Posts: 7,580
Likes: 7
From: The Internet (& Dyer, Indiana)
Thank you! But don't go out of your way to hurry.
I'll likely be waiting for a rainy Saturday to play with it.
Winter is around the corner. I do look forward to seeing the pic though.
Real good chance I will be installing the risers.
Thread Starter
|
Cruiser
Joined: Aug 2010
Posts: 105
Likes: 2
From: NC
I took a series of pics from farther away to closer... I was gonna set the bars at the same angle as the risers, but a little higher angle was better for me.
By the way, the black bag on the risers is a Wiley X sunglasses pouch. Perfect place to zip-tie it.
Outstanding HDF Member
Joined: Jun 2005
Posts: 2,172
Likes: 7
From: Clermont, GA, CSA
That's the same set-up that was on my '02 Heritage when I bought it back in Jan. It gave me almost the same riding position on my Sportster I had with mini-apes.
Whoever had that Heritage before I bought it was accessorising it .... for me! Bars, pipes, pegs, etc. exactly what I would have put on it was already there!
Whoever had that Heritage before I bought it was accessorising it .... for me! Bars, pipes, pegs, etc. exactly what I would have put on it was already there!
Banned
Joined: Sep 2009
Posts: 7,580
Likes: 7
From: The Internet (& Dyer, Indiana)
Okay, here you go. Let me know if this is not what you need...
I took a series of pics from farther away to closer... I was gonna set the bars at the same angle as the risers, but a little higher angle was better for me.
By the way, the black bag on the risers is a Wiley X sunglasses pouch. Perfect place to zip-tie it.
I took a series of pics from farther away to closer... I was gonna set the bars at the same angle as the risers, but a little higher angle was better for me.
By the way, the black bag on the risers is a Wiley X sunglasses pouch. Perfect place to zip-tie it.
Great pics!
Thank you for your efforts. I'm convinced that I should have put mine on long ago. Gonna be some garage time in my near future.
Thanks!
Seasoned HDF Member
Joined: Sep 2009
Posts: 17,149
Likes: 6,174
From: SE Michigan
Awesome pics, thanks! Does HD make 4" NON pullback (straight) risers?
It looks like this kit: http://www.harley-davidson.com/gma/g...bmLocale=en_US is for 1.25" bars and the stock Heritage bars are 1", I doubt they would work - ?
It looks like this kit: http://www.harley-davidson.com/gma/g...bmLocale=en_US is for 1.25" bars and the stock Heritage bars are 1", I doubt they would work - ?
Thread Starter
|
Cruiser
Joined: Aug 2010
Posts: 105
Likes: 2
From: NC
Awesome pics, thanks! Does HD make 4" NON pullback (straight) risers?
It looks like this kit: http://www.harley-davidson.com/gma/g...bmLocale=en_US is for 1.25" bars and the stock Heritage bars are 1", I doubt they would work - ?
It looks like this kit: http://www.harley-davidson.com/gma/g...bmLocale=en_US is for 1.25" bars and the stock Heritage bars are 1", I doubt they would work - ?
http://www.harley-davidson.com/gma/g...bmLocale=en_US
...shows a pic of the curved risers, but also lists the 4" and 6" straight ones down lower on the page.
HD Forum Stories
The Best of Harley-Davidson for Lifelong Riders
Jason Momoa Is Turning Classic Harleys Into PHEVs
Verdad Gallardo
Harley-Davidson Fat Boy Becomes a Dark, Decepticon-Inspired Custom
Verdad Gallardo
6 Weirdest Harley-Davidsons Ever Sold to the Public
Verdad Gallardo
7 Times Harley-Davidson Chucked Tradition Out the Window
Verdad Gallardo
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Verdad Gallardo
8 Best Harley-Davidson Motorcycles Ever
Pouria Savadkouei
10 Worst Harley-Davidson Motorcycles Ever
Pouria Savadkouei
Killer Custom's Jail Break Is The Breakout That Refused to Blend In
Verdad Gallardo
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Verdad Gallardo
Seasoned HDF Member
Joined: Sep 2009
Posts: 17,149
Likes: 6,174
From: SE Michigan
This page...
http://www.harley-davidson.com/gma/g...bmLocale=en_US
...shows a pic of the curved risers, but also lists the 4" and 6" straight ones down lower on the page.
http://www.harley-davidson.com/gma/g...bmLocale=en_US
...shows a pic of the curved risers, but also lists the 4" and 6" straight ones down lower on the page.
Thread
Thread Starter
Forum
Replies
Last Post
