When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
On my Rocker, I didn't need to remove the tank when I installed my braided cables. I was able to sneak them down after loosening the tank enough to lift it to clear a bit.
Nope. Gotta pull the tank. Its easy. If its EFI the fuel line is a quick coupler and you cut the clamps on the front balance line and the dash is one nut and a few elec conectors. Good time to fab up a tank lift too.
Or you can jsut slide the tank back by removing the front and rear bolts and unplugging the gas line. It sure is easier to get in there with the tank slid back.
Take the squeeze clamp off of the main pressure like and installa long line going into a coffee can or somthing and turn the key on and let the pump do the work.
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Slideshow: The bar-and-shield logo shows up on far more than motorcycles, some of the company's most unexpected products have nothing to do with riding.
Slideshow: From the troubled AMF years to modern misfires, these bikes earned reputations for reliability issues, questionable engineering, or disappointing performance.
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Slideshow: The Swiss custom shop has taken a Harley Softail and stretched it into something so long and low that it looks closer to a rolling sculpture than a conventional motorcycle.
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Slideshow: A standard cruiser becomes an intricate metal canvas in the hands of a Swiss custom house known for pushing Harley-Davidson platforms far beyond their factory brief.
Slideshow: Harley-Davidson's challenges aren't abstract; they show up in dropping shipments, shrinking dealer traffic, and strategic decisions that aren't yet translating into growth.