New winter mod thread!
Stellar HDF Member
Joined: Jun 2006
Posts: 3,481
Likes: 11
From: NJ
Ok, one "non" related mod for me this winter is this:
http://www.youtube.com/watch?v=B-sOgG3h6l0
Now, if I can only figure out where to start.......
http://www.youtube.com/watch?v=B-sOgG3h6l0
Now, if I can only figure out where to start.......
Intermediate
Joined: Dec 2010
Posts: 29
Likes: 0
Rocker mods
got some of my stuff in from Drew.... thanks man. Thought I'd share my work in progress. So far VH pipes, RSD ac, DK customs 2" tank lift, HD contrast cut grips, levers, pegs, shifter/brake arms, and drag specialties flamed mirrors. Next is a bunch of Heartland stuff and progressive 422's.
Road Master
Joined: Sep 2007
Posts: 1,098
Likes: 154
From: pittsburgh,pa
Ok, one "non" related mod for me this winter is this:
http://www.youtube.com/watch?v=B-sOgG3h6l0
Now, if I can only figure out where to start.......
http://www.youtube.com/watch?v=B-sOgG3h6l0
Now, if I can only figure out where to start.......
HD Forum Stories
The Best of Harley-Davidson for Lifelong Riders
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Verdad Gallardo
8 Best Harley-Davidson Motorcycles Ever
Pouria Savadkouei
10 Worst Harley-Davidson Motorcycles Ever
Pouria Savadkouei
Killer Custom's Jail Break Is The Breakout That Refused to Blend In
Verdad Gallardo
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Verdad Gallardo
Harley-Davidson Reveals Super Cool Cafe Racer Concept
Verdad Gallardo
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Verdad Gallardo
10 Motorcycles You Should Never Buy
Joe Kucinski
10 Things Harley-Davidson Needs to Fix in 2026
Verdad Gallardo
Road Captain
Joined: Jun 2007
Posts: 726
Likes: 3
From: Pacific Northwest
Started these mods after x-mas and finally had a sunny day to take some pics.
Got the Ride Wrights for X-mas. Now are these called "Fat Daddys" or "Fat 50s" or ???
Put them on in early January. The rear was a PITA (getting the wheel off that is)
Front was a piece of cake. Oh yeah, I don't mind the reflectors. They're staying on.
Did ya ever notice that bling adds to bling? You can't just fix up one part of your bike without fixing up the part next to it. Case in point...the rear wheel. This shiny new wheel make by pulley look like crap. Shopped around for a nice chrome pulley, but I was tapped out after laying out the $$$ for these wheels.
Had to settle for this sprocket cover. Almost got one on Ebay but found this brand new one locally on Craigslist for $30.
Once again I tried to take a shortcut but this time I won!
Was able to slip the pully off without removing my wheel!
New pulley installed but it was getting dark so i finished the install today. The only drawback to the installation on the bike was that I wasn't able to get my torque wrench on the bolts. And yes, I did the no-no and reused the old bolts. The next time the wheel is off I'm going to replace with chrome high strength bolts (if these is such a thing) and properly torque them down.
Sunny day today so I thought I'd get some better pics.
Too bad the rotor and pulley cover up most of my shiny new wheel.
Taking the dog bowl off was a great improvement.
Would have loved to put a custom pulley on but the chrome cover is a inexpensive alternate and a vast improvement.
Now if it would just warm up I could play with my toys.
Hope your mods are going good.
I'm not done yet, just out of $$$
Got the Ride Wrights for X-mas. Now are these called "Fat Daddys" or "Fat 50s" or ???
Put them on in early January. The rear was a PITA (getting the wheel off that is)
Front was a piece of cake. Oh yeah, I don't mind the reflectors. They're staying on.
Did ya ever notice that bling adds to bling? You can't just fix up one part of your bike without fixing up the part next to it. Case in point...the rear wheel. This shiny new wheel make by pulley look like crap. Shopped around for a nice chrome pulley, but I was tapped out after laying out the $$$ for these wheels.
Had to settle for this sprocket cover. Almost got one on Ebay but found this brand new one locally on Craigslist for $30.
Once again I tried to take a shortcut but this time I won!
Was able to slip the pully off without removing my wheel!
New pulley installed but it was getting dark so i finished the install today. The only drawback to the installation on the bike was that I wasn't able to get my torque wrench on the bolts. And yes, I did the no-no and reused the old bolts. The next time the wheel is off I'm going to replace with chrome high strength bolts (if these is such a thing) and properly torque them down.
Sunny day today so I thought I'd get some better pics.
Too bad the rotor and pulley cover up most of my shiny new wheel.
Taking the dog bowl off was a great improvement.
Would have loved to put a custom pulley on but the chrome cover is a inexpensive alternate and a vast improvement.
Now if it would just warm up I could play with my toys.
Hope your mods are going good.
I'm not done yet, just out of $$$
Thread
Thread Starter
Forum
Replies
Last Post
In Memoriam Citoriplus
General Harley Davidson Chat
32
Feb 2, 2009 10:44 PM
