Got my bars

Reply Subscribe

Thread Tools

Search this Thread

Mar 15, 2011 | 07:37 AM

#21

SVT WUT 7

Cruiser

Joined: Sep 2007

Posts: 182

Likes: 0

From: Charlotte, NC

Quote:

Originally Posted by NightTrainRob

Started messing around with the bike and bars tonight...How far do I need to leave the set screw up in the risers? How should the bars be tilted?

Tilt them to your liking. Whatever is comfortable for you.

Mar 15, 2011 | 08:19 AM

#22

DR. V-TWIN

Former Sponsor

Joined: Jan 2009

Posts: 19,364

Likes: 40

From: Los Angeles, CA

Tilt them as you like. Once you find a position you want to keep them in run the set screws up until the hit the bars. tighten down a bit and you will be good. One word of advice, the set screws are a pin to get to as are the riser bolts since they are on the bottom of the risers. Figure out where you want the bars and leave them there. Then if you have to remove everything once all is installed just pop out the risers bolts from the tree. It is much easier than dealign with the hidden riser cap bolts and set screws.

Drew

Mar 19, 2011 | 07:00 PM

#23

07ntrain

Tourer

Joined: Mar 2010

Posts: 334

Likes: 53

Anybody have pics yet?

Mar 19, 2011 | 07:47 PM

#24

tap_rack_bang

Intermediate

Joined: Dec 2009

Posts: 47

Likes: 0

From: DFW Texas

I finished everything up this evening, ill get some pictures up here asap tomorrow when I have some decent lighting... Unless you absolutely want some dimly lit pictures to hold you over till then lol