question about screamin eagle slip-ons
Road Warrior
Joined: Sep 2006
Posts: 1,323
Likes: 88
From: NJ
RE: question about screamin eagle slip-ons
ORIGINAL: jhugs92
yes, i found the trick. throw them away and get rush slip-ons, that's what i did. very pleased with 2" baffles. no removing new s/e baffles.
yes, i found the trick. throw them away and get rush slip-ons, that's what i did. very pleased with 2" baffles. no removing new s/e baffles.
Advanced
Joined: Feb 2007
Posts: 97
Likes: 0
From: SYRACUSE, NEW YORK
RE: question about screamin eagle slip-ons
ORIGINAL: jhugs92
yes, i found the trick. throw them away and get rush slip-ons, that's what i did. very pleased with 2" baffles. no removing new s/e baffles.
yes, i found the trick. throw them away and get rush slip-ons, that's what i did. very pleased with 2" baffles. no removing new s/e baffles.
Guest
Posts: n/a
RE: question about screamin eagle slip-ons
I have a set of the SE II and I removed the baffles. After removing the bolts that held the baffles, I used a pair of plyers to grip the baffles and struck the plyers with a hammer and they came right out. I loved the sound as it was very loud but, unfortunatley, my 2 up didn't. So now I have three sets of SOs for the bike; the stock, the gutted SEs and now a set of Rush 2" baffles. I can live with the Rush since they have removable baffles. In the event I want toenjoy the loudness again, I simply remove the bolts and pull out the Rush baffles. Very loud too.
07HC
07HC
Intermediate
Joined: Apr 2007
Posts: 45
Likes: 0
RE: question about screamin eagle slip-ons
I pulled the baffles out of the SEII's it was pretty simple. I took the bolts out of the SE but they are not budging.
Once you pull the baffles out is there any other tuning that should be done?
Once you pull the baffles out is there any other tuning that should be done?
Thread
Thread Starter
Forum
Replies
Last Post
vt_big_dog
Exhaust System Topics
24
Dec 19, 2007 02:05 PM
