01 night train exhaust

Reply Subscribe

Thread Tools

Search this Thread

Mar 25, 2011 | 02:15 PM

cliveh

Thread Starter

6th Gear

Joined: Mar 2011

Posts: 14

Likes: 0

From: snells beach

01 night train exhaust

I have just purchased a 2001 Night train with baloney cut slip ons. Dose anyone know how or has removed the baffles from these???

Mar 25, 2011 | 02:21 PM

tke899

Cruiser

Joined: Aug 2009

Posts: 107

Likes: 0

Most baffles are just tac welded or bolted on. You should be able to tell by inspection.

I would however advise against removing the baffles. You will most likely lose power and torque. Generally causes the motor to run like a bag of smashed A-holes as well.

Mar 25, 2011 | 02:31 PM

cliveh

Thread Starter

6th Gear

Joined: Mar 2011

Posts: 14

Likes: 0

From: snells beach

Is there a way I can get them to sound a bit better than the stangled fart that they sound like now!!!!!!!!

Mar 25, 2011 | 03:22 PM

DR. V-TWIN

Former Sponsor

Joined: Jan 2009

Posts: 19,364

Likes: 40

From: Los Angeles, CA

Baffles are usually bolted in with a bolt on the bottom of the exhaust. If you have heat shields it might be under them.

Drew

Mar 25, 2011 | 04:31 PM

The Count

Advanced

Joined: Oct 2010

Posts: 89

Likes: 0

From: Cuse'

I just got my pipes back from jet hot and I was curious as to how the pipes would sound with the baffles out. Installed the pipes fired it up and basically broke out in laughter as the sound was pathetic. I thought it would make my bike rumble more but it sounded like a whacked out lawn mower... needless to say the baffles are back in.