Bike stalling
Thread Starter
|
Cruiser
Joined: May 2008
Posts: 100
Likes: 0
From: baltimore,md
Bike stalling
Ok my buddy has an 06 springer. Recently had a battery replacement. Non oem battery. Bike runs great when cold. After warmed up speedo drops out,turn signals malfunction and bike won't idle,stalls when stopping. Any ideas,possible tsm,tssm module? The malfunctions were there prior to battery replacement. Have not tried to retrieve any dtc's yet.
Stellar HDF Member
Joined: Mar 2006
Posts: 2,395
Likes: 153
From: Utah
KISS principle is where I would start. The biggest complaint (other than those plastic cam chain followers) that happens with HD's is electrical bugs. Keep it simple rather than replacing all of those sensors, etc. You need to test the output of the stator, the ignition switch, the run/stop switch conections, etc. If you want to do the replace until it works method, get a buddy who has the same bike and borrow his stuff instead of buying new... including a different battery. Battery connections are an AMAZING source of these kinds of issues.
You can't get a break out box like the dealer has to test all of your circuits. Buy a shop manual including the electrical supplement and start there.
C#
You can't get a break out box like the dealer has to test all of your circuits. Buy a shop manual including the electrical supplement and start there.
C#
Thread
Thread Starter
Forum
Replies
Last Post
