round 1 winter mods
Thread Starter
|
Ultimate HDF Member
Joined: Mar 2008
Posts: 6,344
Likes: 6
From: my house
no custom made by this dude in washington
http://jimmyrays.org/home.html
he is a pleasure to work with
i have been out all over da burbs LOL no my leg and foot are fine
actually mimo im gunna sell em i think get a few quarters back LOL
LOL 1st thing i did was rattle can that i couldnt get to it last year cuz pipes were in the way
they have me 3x! effers hurt too
sw burbs anytime after march though LOL
i would like to weld 2 small fangs LOL
http://jimmyrays.org/home.html
he is a pleasure to work with
they have me 3x! effers hurt too
Ultimate HDF Member
Joined: May 2010
Posts: 7,882
Likes: 5
From: So California
Mike, can't you just make a template out of cardboard to get the shape and length you want?
If you like the stock end of the fender, trace and cut the cardboard to match and then slide it up or down and stand back and adjust if needed.
Yelling blue is faster while eyeballing it helps....
If you like the stock end of the fender, trace and cut the cardboard to match and then slide it up or down and stand back and adjust if needed.
Yelling blue is faster while eyeballing it helps....
Thread Starter
|
Ultimate HDF Member
Joined: Mar 2008
Posts: 6,344
Likes: 6
From: my house
too easy kowan is a slacker- why do u think team blue is slower? LOL
heres some more work chopped fender some
Ultimate HDF Member
Joined: May 2010
Posts: 7,882
Likes: 5
From: So California
Good job on the trimming Mike.
I was waiting for my camera cleaning kit to arrive...
Then a new HeadWinds headlight showed up...
It looks like either HD copied the HeadWinds or vs. versy.
The Headwind is longer though and I had to run and get a different bolt to mount it's base. I need to slice the wires and then cover the wires with some chrome look weave loom. I installed a 55/100w H4 in it.
I will get some pictures once I get a day off again starting Sunday.
I was waiting for my camera cleaning kit to arrive...
Then a new HeadWinds headlight showed up...
It looks like either HD copied the HeadWinds or vs. versy.
The Headwind is longer though and I had to run and get a different bolt to mount it's base. I need to slice the wires and then cover the wires with some chrome look weave loom. I installed a 55/100w H4 in it.
I will get some pictures once I get a day off again starting Sunday.
Club Member
Joined: May 2007
Posts: 145,895
Likes: 821
From: 40 miles Northeast of Indy..
HD Forum Stories
The Best of Harley-Davidson for Lifelong Riders
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Verdad Gallardo
8 Best Harley-Davidson Motorcycles Ever
Pouria Savadkouei
10 Worst Harley-Davidson Motorcycles Ever
Pouria Savadkouei
Killer Custom's Jail Break Is The Breakout That Refused to Blend In
Verdad Gallardo
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Verdad Gallardo
Harley-Davidson Reveals Super Cool Cafe Racer Concept
Verdad Gallardo
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Verdad Gallardo
10 Motorcycles You Should Never Buy
Joe Kucinski
10 Things Harley-Davidson Needs to Fix in 2026
Verdad Gallardo
Thread Starter
|
Ultimate HDF Member
Joined: Mar 2008
Posts: 6,344
Likes: 6
From: my house
ok lets start another tire thread inside this thread LOL
so 260 fits stock right? LOL
i will probably get a new tire / bearings when the 240 turns into bahloney !
and oh man do i have a shaweet mod comin!!!
& figures back to the 40- & 50's again this weekend CHIT
oh anyway dropped off a nice batch of chrome stuff to powderpro yesterday
so 260 fits stock right? LOL
i will probably get a new tire / bearings when the 240 turns into bahloney !
and oh man do i have a shaweet mod comin!!!
& figures back to the 40- & 50's again this weekend CHIT
oh anyway dropped off a nice batch of chrome stuff to powderpro yesterday