burly bikini bars installed on the Heritage!
#1
burly bikini bars installed on the Heritage!
Hey guys,
Just got the Burly Bikini 1.25 Beach Bars installed on my 05 Heritage. Here are some pictures as promised.
Pretty easy install. I used the stock clutch and throttle cables, Novello 4 wire extensions, and a 50 brake line (which was a tad long, should have been closer to 48). Its possible that I could have used the stock wiring if I didnt route them internally, but it would have been tight.
For some reason, I can't upload pictures to this site, so here is a link to Flickr:
http://www.flickr.com/photos/1133279...ream/lightbox/
Just got the Burly Bikini 1.25 Beach Bars installed on my 05 Heritage. Here are some pictures as promised.
Pretty easy install. I used the stock clutch and throttle cables, Novello 4 wire extensions, and a 50 brake line (which was a tad long, should have been closer to 48). Its possible that I could have used the stock wiring if I didnt route them internally, but it would have been tight.
For some reason, I can't upload pictures to this site, so here is a link to Flickr:
http://www.flickr.com/photos/1133279...ream/lightbox/
#3
#4
#5
[quote=H-D DAD;9385995]Hey guys,
Just got the Burly Bikini 1.25” Beach Bars installed on my 05 Heritage. Here are some pictures as promised.
Pretty easy install. I used the stock clutch and throttle cables, Novello 4” wire extensions, and a 50” brake line (which was a tad long, should have been closer to 48”). It’s possible that I could have used the stock wiring if I didn’t route them internally, but it would have been tight.
For some reason, I can't upload pictures to this site, so here is a link to Flickr:
I tried to image it for ya but it wouldn't work for me either.
Nice Looking bike though. I like the wide beach bars
Just got the Burly Bikini 1.25” Beach Bars installed on my 05 Heritage. Here are some pictures as promised.
Pretty easy install. I used the stock clutch and throttle cables, Novello 4” wire extensions, and a 50” brake line (which was a tad long, should have been closer to 48”). It’s possible that I could have used the stock wiring if I didn’t route them internally, but it would have been tight.
For some reason, I can't upload pictures to this site, so here is a link to Flickr:
I tried to image it for ya but it wouldn't work for me either.
Nice Looking bike though. I like the wide beach bars
Last edited by jbmolly; 02-13-2012 at 07:59 AM.
#6
When I turn down my bars I can't see a damn thing with my PM mirrors!!!! Any problems with yours?
Nyce ryde,DaD!! Welcome to the BeachBar scene!
Last edited by socal yankee; 02-13-2012 at 08:30 AM.
#7
Trending Topics
#10