How are your knobs
Thread Starter
|
Cruiser
Joined: Dec 2006
Posts: 133
Likes: 0
From:
How are your *****
My 07 springer classic had a pilion seat, which I tossed along with the passenger foot pegs.
The foot peg on the right (looking from the rear) was replaced by a gloss black bolt , and the one on the left will be getting the modified mounting bracket so it can still hold the exhaust.(new one ordered so I can keep the original)
Now the ***** part.
Those two *****, which hold the seat in place, that keep comming loose, look like something off a machine lathe or panel mount.
I need suggestions on what to replace them with. Preferably something I can get power coated black. and something that will not stick up like those *****.
Oh yes and I also put the black fender rack on the back.
Your suggestions about my *****,will be greatly appreciated.
Mac Clarke
macclarke@sasktel.net
The foot peg on the right (looking from the rear) was replaced by a gloss black bolt , and the one on the left will be getting the modified mounting bracket so it can still hold the exhaust.(new one ordered so I can keep the original)
Now the ***** part.
Those two *****, which hold the seat in place, that keep comming loose, look like something off a machine lathe or panel mount.
I need suggestions on what to replace them with. Preferably something I can get power coated black. and something that will not stick up like those *****.
Oh yes and I also put the black fender rack on the back.
Your suggestions about my *****,will be greatly appreciated.
Mac Clarke
macclarke@sasktel.net
Cruiser
Joined: Dec 2005
Posts: 135
Likes: 0
From:
RE: How are your *****
Check out the Softail Deluxe Picture thread. Our bikes I think use the same two *****. Someone sells replacements that are shaped like spades. they look nice, I just haven't ordered mine yet.
Mike
Mike
Thread
Thread Starter
Forum
Replies
Last Post
