When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
~1K's the norm so you're in the window, but there are aftermarket tuners out which allow idle adjustments. Wouldn't recommend much lower...for reasons others indicated.
I just wish I could get my 2012 Heritage to idle less 1200 rpms. I have to ride the clutch and brake in slow traffic to keep from rear-ending traffic in front of me.
950-1000 is normal for my bike. Most of the time anyways. I've had long recurring issues with the idle dropping down to as low as 700. I thought I had them fixed when I replaced the Vehicle Speed Sensor and Idle air control as well as a new AC with breathers that vented straight to the atmosphere but the problem has come back. Not going quite as low as 700 more like 800-900 but still there. Runs like a top when I get going again.
If your talking the Eitms mode it does not slow down. It drops a cylinder and picks up rpm to maintain 1k.
Are you sure. I own a 2006 and didn't think that was available on this year. In the idle table on the super tuner, it shows the idle drop at higher temps and it goes under 1k. I forget how low because it's been a while, but 750-800 maybe?
And besides, dropping a cylinder wouldn't cut the RPMs in half. It would still be idling at the same RPM, just with one less cylinder.
i have a 103 in my breakout. when i bought it, idle was around 950 to 1050. after my stage 1, it was 1000 to 1200 depending on if it was warmed up. not sure if that's normal or not, but that's what it is.
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Slideshow: The bar-and-shield logo shows up on far more than motorcycles, some of the company's most unexpected products have nothing to do with riding.
Slideshow: From the troubled AMF years to modern misfires, these bikes earned reputations for reliability issues, questionable engineering, or disappointing performance.
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Slideshow: The Swiss custom shop has taken a Harley Softail and stretched it into something so long and low that it looks closer to a rolling sculpture than a conventional motorcycle.
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Slideshow: A standard cruiser becomes an intricate metal canvas in the hands of a Swiss custom house known for pushing Harley-Davidson platforms far beyond their factory brief.
Slideshow: Harley-Davidson's challenges aren't abstract; they show up in dropping shipments, shrinking dealer traffic, and strategic decisions that aren't yet translating into growth.