Picked up my 2011 Fat Boy Lo
Thread Starter
|
Intermediate
Joined: Aug 2011
Posts: 31
Likes: 0
From: New Jersey
project fatboy: The bars are made by BR Custom Cycles.
Fatbob usmc EOD: Do you have any closeup pictures of the levers you made?
Save some money on the brake and shift levers and do it with rustoleum bed liner. I did it to mine and it looks great and saved me a couple of hundred dollars or a lot of downtime waiting to get them powder coated. Just knock the chrome off with a scotch pad and do three coats. Baking it in the oven for about 15-20 min at 200 degrees between coats.
Road Master
Joined: Dec 2010
Posts: 1,248
Likes: 1
From: Jacksonville, NC
Here you go. The pics were taken with an iPhone so of course they look even better in person. One thing to note on doing the brake is that you will need a new cotter pin kit. I think that's what it's called. Take a look at the pin that is bent around the retaining bolt and you'll see what I'm talking about.
Thread Starter
|
Intermediate
Joined: Aug 2011
Posts: 31
Likes: 0
From: New Jersey
Here you go. The pics were taken with an iPhone so of course they look even better in person. One thing to note on doing the brake is that you will need a new cotter pin kit. I think that's what it's called. Take a look at the pin that is bent around the retaining bolt and you'll see what I'm talking about.
Thread
Thread Starter
Forum
Replies
Last Post
