Help With SE Pro Super Tuner
Thread Starter
|
Road Master
Joined: Oct 2008
Posts: 970
Likes: 19
From: Philippines
Help With SE Pro Super Tuner
This is a lengthy story so I'll try to stay on point. First off let me state that I'm in the Philippines. No Dealership, no Harley parts, and no Dyno in this country. A riding brother of mine asked me to help him tune his bike.
The bike is an 09 Rocker with a Hypercharger Intake, Vance & Hines Pipes, and SE 211 cams. While in Australia, a Harley dealer talked him into purchasing the Screamin Eagle Pro Race Tuner. I recommended another product but it's a done deal. The instructions with the Race Tuner were more confusing than helpful and we found more helpful information on Youtube. The idea was to mate the Pro Tuner with the bike and load the appropriate Map from the provided software package. No such luck.
We loaded the software into his laptop and connected the laptop and Tuner to the bike. Energized the bike, and the tuner married up to the ECM properly. Searched the web for up-dated software but found none. Everything up to this point was going smoothly and we were now ready to reflash the ECM with one of Harley's pre-installed Maps however there was no Map that matched his 09 Rocker.
Ended up calling Harley Australia and talked to the tech rep who sold him the tuner. He instructed us to use a Map for an 07 Softail due to the fact that the electronics were the same. We and the tech rep together found a map for an 07 Softail with stage 1 intake and exhaust but nothing which included SE 211 cams. The tech rep who was still on the phone confirmed that there was no appropriate map containing the 211 cams.
We were then instructed by the tech rep to use the 07 Softail map which included stage 1 intake and exhaust and to then change the displacement from 96 cubic inches to 98 cubic inches. This virtual increase in displacement would prompt the ECM to inject more fuel thereby enriching the air fuel mixture. The bike runs better but definitely isn't properly tuned.
Anyone with Pro Race Tuner experience please chime in.
Bob
The bike is an 09 Rocker with a Hypercharger Intake, Vance & Hines Pipes, and SE 211 cams. While in Australia, a Harley dealer talked him into purchasing the Screamin Eagle Pro Race Tuner. I recommended another product but it's a done deal. The instructions with the Race Tuner were more confusing than helpful and we found more helpful information on Youtube. The idea was to mate the Pro Tuner with the bike and load the appropriate Map from the provided software package. No such luck.
We loaded the software into his laptop and connected the laptop and Tuner to the bike. Energized the bike, and the tuner married up to the ECM properly. Searched the web for up-dated software but found none. Everything up to this point was going smoothly and we were now ready to reflash the ECM with one of Harley's pre-installed Maps however there was no Map that matched his 09 Rocker.
Ended up calling Harley Australia and talked to the tech rep who sold him the tuner. He instructed us to use a Map for an 07 Softail due to the fact that the electronics were the same. We and the tech rep together found a map for an 07 Softail with stage 1 intake and exhaust but nothing which included SE 211 cams. The tech rep who was still on the phone confirmed that there was no appropriate map containing the 211 cams.
We were then instructed by the tech rep to use the 07 Softail map which included stage 1 intake and exhaust and to then change the displacement from 96 cubic inches to 98 cubic inches. This virtual increase in displacement would prompt the ECM to inject more fuel thereby enriching the air fuel mixture. The bike runs better but definitely isn't properly tuned.
Anyone with Pro Race Tuner experience please chime in.
Bob
Last edited by olongapo1; Dec 27, 2012 at 05:23 PM.
Thread Starter
|
Road Master
Joined: Oct 2008
Posts: 970
Likes: 19
From: Philippines
cgmartine,
Yes, I live in Olongapo and yes, the US Military pulled out in 91. Subic Bay and Clark are now Free Port Industrial Zones. Olongapo is a nice quiet place to live. Great retirement area. The country has come a long way from what you remember from the 70's. We have major highways and proper shopping malls. There are however still some of the attractions you remember which I can't write about on this site!!!
There are a small number of Harley's in country which have been brought in by individual owners at great expense. Roughly 80 sometimes 100 percent customs import tax. A used Harley in the states selling for $10,000 will cost you double that here.
Yes, I live in Olongapo and yes, the US Military pulled out in 91. Subic Bay and Clark are now Free Port Industrial Zones. Olongapo is a nice quiet place to live. Great retirement area. The country has come a long way from what you remember from the 70's. We have major highways and proper shopping malls. There are however still some of the attractions you remember which I can't write about on this site!!!
There are a small number of Harley's in country which have been brought in by individual owners at great expense. Roughly 80 sometimes 100 percent customs import tax. A used Harley in the states selling for $10,000 will cost you double that here.
There is a tuner section on here the guys are all pros on there, repost there.I also have one on my train , when tuned the map used was not the same cam, my tuner rick Stetson did 25 runs before he got it right. Yours is a much more common build so some one should have a map, when done right the screaming eagle race tuner can't be beat.it will hold the tune until you change pipes or air...good luck
Outstanding HDF Member
Joined: Oct 2011
Posts: 3,492
Likes: 19
From: Illinois
I have an 06 Deluxe, the motor is not stock, far from it and I also have the 211 cams and SE race tuner too. I am at work right now but when I get home I will see if I can dig something out of all the paper work I have and see what I can come up with for you. What is it exactly that you are looking for? I can also confirm what what poster replied with that when done right this combo is awesome!! I have cought some flack from one guy telling me what a POS the SE race tuner is. I can only say he obviousley has never been on a bike tuned with one. My bike screams when giving the throttle a good twisting.
Thread
Thread Starter
Forum
Replies
Last Post
6-14-18 My ECM just died two weeks ago on my 2009 Heritage and I had a SE super tuner pro, 32109-08C
Route 66
Ignition/Tuner/ECM/Fuel Injection
4
Jun 16, 2018 09:19 AM
GatorRI
Ignition/Tuner/ECM/Fuel Injection
9
Nov 5, 2012 09:37 AM
