Stripped her down
Stripped her down
Road Captain
Joined: Nov 2009
Posts: 523
Likes: 1
From: Central Alberta, Canada
The ECM shouldn't be sitting under the pillion, it should be under the back half of the rider seat, unless Heritages are drastically different than virtually every other softail I've seen with the seat off. If you are talking about a solo seat in the sense of a C&C Solo or a LePera Barebones, they should fit over top of the ECM the same way the stock seat does. If you mean a sprung solo seat, whoever makes the seat can probably point you to a battery cover to go under the seat that would probably also cover the ECM. I know guys doing a spring seat on sporties had to relocate their ECM's, but I don't think it's strictly necessary on softails.
+1 on above. If you really want to make it go away, it can be relocated to the area in front of the rear tire splash guard. You'll then need to find something to fill the plastic recess in the fender, but the ECM will be gone anyway. There were a coupl threads about this recently, try some of the threads I linked to below, they might be able to help you out a bit more! Good luck, and remember, pics are required or the mod never happened!
https://www.google.com/search?q=ecm+...&client=safari
https://www.google.com/search?q=ecm+...&client=safari
Road Master
Joined: Apr 2009
Posts: 754
Likes: 24
From: Southern Maine
Take a look at Mother Road Customs, they offer some great packages for Softails. http://motheroadcustoms.auctivacomme....aspx?sid=4811
Thread
Thread Starter
Forum
Replies
Last Post
