When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
My Danny Gray pillion on my Blackline had 1 bolt, and some suction cups. It worked fine. Pretty sure bitchin seats uses suction cups on the pillion as well. They use velcro to hold the front seat on, so I don't know what you would bolt the pillion to.
My Danny Gray pillion on my Blackline had 1 bolt, and some suction cups. It worked fine. Pretty sure bitchin seats uses suction cups on the pillion as well. They use velcro to hold the front seat on, so I don't know what you would bolt the pillion to.
Good point about the Bitchin Seats. I'm sure the suction cups are fine but it still seems a little sketch. If DG doesn't come out with a better option I'll either refab my stock seats or do the custom thing.
Good point about the Bitchin Seats. I'm sure the suction cups are fine but it still seems a little sketch. If DG doesn't come out with a better option I'll either refab my stock seats or do the custom thing.
You will like it. I've seen it (pre-fab)and it looks spot on. Give them a few days before doing anything.
I took this picture of my bars for a guy but you can see my front seat and backrest in it fairly well. I had the passenger seat and backrests done to match too, that Gelfoam is awesome.. Good luck and keep us posted on what route you choose.
1393890_10200109319496057_206881228_n[1].jp
Last edited by tbonetony06; Jun 17, 2014 at 11:57 AM.
I took this picture of my bars for a guy but you can see my front seat and backrest in it fairly well. I had the passenger seat and backrests done to match too, that Gelfoam is awesome.. Good luck and keep us posted on what route you choose.
1393890_10200109319496057_206881228_n[1].jp
Just think how dirty that seat would get if you actually rode the bike.
hell yeah! see, i knew you were more than just a bad *** bike. hahahaha. congrats on the patch man! i've still got a ways to go. hell, i'm still waiting for my ncic to clear. but it's been one hell of a ride already.
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Slideshow: The bar-and-shield logo shows up on far more than motorcycles, some of the company's most unexpected products have nothing to do with riding.
Slideshow: From the troubled AMF years to modern misfires, these bikes earned reputations for reliability issues, questionable engineering, or disappointing performance.
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Slideshow: The Swiss custom shop has taken a Harley Softail and stretched it into something so long and low that it looks closer to a rolling sculpture than a conventional motorcycle.
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Slideshow: A standard cruiser becomes an intricate metal canvas in the hands of a Swiss custom house known for pushing Harley-Davidson platforms far beyond their factory brief.
Slideshow: Harley-Davidson's challenges aren't abstract; they show up in dropping shipments, shrinking dealer traffic, and strategic decisions that aren't yet translating into growth.